Universal Hardness Testing

 

Universal Hardness Testing

One Button Hardness Measurement
The hardness tester measuring head moves down until contact is made, applies the force and make the indentation. The software will move to the camera view mode where the indent is automatically measured.

Closed Loop (Pat. Affri)
Closed loop load cells control load forces with a frequency of 1 khz, assuring perfect linearity in every range. Results are not affected by any structural deflection, misalignment or vibration

Motorized Measuring Head
Automatic movements with automatic loading when contact is made. The approach of the head to the sample and not the opposite allows more accurate, scable and safe measurements.

Protected Diamond Indenter
The Affri diamond indenter has a life-span longer tanks to the special protective cup. The indenter retracts and moves down just after the test piece is clamped thereby minimizing the risk to accidental shock.

Clamping System (Pat. AFFRI)
Secure contact with the specimen is always mantained, even in the unlikely event of any specimen movement during the operation cycle. The clamping system assures perfect stability of any test piece throughout the test cycle.

Motorized Turret (Indenter/Objective)
One slot for an indenter and one slot for an objective. Auto-rotating and auto-tool-switching for a complete automatic measurement cycle.

Software LD3000AX
The preinstalled software controls the whole instrument avoiding setting errors or operators mistakes:
Powerful software for test cycle managing and automatic indent reading. Wide settings parameters for measurement setup, image adjustments, statistics and data storage.

Universal Hardness Testing

MODEL	LD3000AX
Standards	EN-ISO 6506 / EN-ISO 6507 / EN-ISO 6508 / EN-ISO 2039 / EN-ISO 7619 / EN-ISO 868 / ASTM E-103 / ASTM E-18 / ASTM E-10 / ASTM E-384
Height capacity	200 – 240 mm / 7.8 – 9.4” (More on request)
Indenter & Clamping Hood Stroke	Motorized 20 mm / 0.8”
Depth capacity	190 mm / 7.4”
Reading	Focus: automatic and manual – Reading: automatic and manual
Preload	29.4 – 98.1 N (3 – 10 kgf)
Test loads	LD3000 AX (variant 250) from 1 to 250 kgf (From 9,807 to 2452 N). LD3000 AX (variant 3000) from 3 to 3000 kgf (From 29.4 to 29421 N)
	Vickers – Knoop : 9.807 – 19.60 – 29.42 – 49.03 – 98.07 – 196 – 294.2 – 490.35 – 980.7 N (1 – 2 – 3 – 5 – 10 – 20 – 30 – 50 – 100 kgf)
	Brinell : 9.807 – 24.52 – 49.03 – 61.29 – 98.07 – 153.2 – 245.2 – 294.2 – 306.5 – 612.9 – 1226 – 1839 – 2452 – 4903 – 7355 – 9870 – 29421 N)
	(1 – 2.5 – 5 – 6.25 – 10 – 15.6 – 25 – 30 – 31.2 – 62.5 – 125 – 187.5 kgf – 250 – 500 – 750 – 1000 – 3000 kgf)
	Rockwell : 588.4 – 980.7 – 1471 N (60 – 100 – 150 kgf)
	Superficial Rockwell : 147.1 – 294.2 – 441.3 N (15 – 30 – 45 kgf)
Feasible tests	Rockwell : HRC – HRA – HRD – HRB – HRF – HRG – HRL – HRM – HRR
	Superficial Rockwell : HRN – HRT
	Brinell HBW (Depending on the models) : HBW1/30 – HBW2.5/15.625 – HBW2.5/31.25 – HBW2.5/62.5 – HBW2.5/187.5 –HBW5/25 – HRW5/62.5 – HBW5/125 – HBW5/250 – HBW5/750 – HBW10/100 – HBW10/250 – HBW10/500 – HBW10/1000 – HBW10/1500 – HBW10/3000
	Brinell HBWT (Depending on the models) : HBT 2.5/62.5 – HBT 2.5/187.5 – HBT 5/125 – HBWT5/250 – HBWT5/750 – HBWT10/500 – HBWT10/1000 – HBWT10/1500 – HBWT10/3000
	Vickers (Depending on the models) : HV1 – HV2 – HV3 – HV5 – HV10 – HV20 – HV30 – HV50 – HV100
Load accuracy	Better than 0.05 %

 

Kami juga menyediakan Jasa Perbaikan (SERVICE), Jasa Perawatan (Maintenace) dan support untuk KALIBRASI / AKSESSORIES SPAREPART jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda.

Universal Hardness Testing

PT. Mora Anugerah Berkat (M.A.B)
Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang – Provinsi Banten
Phone : 021 7345.7064
Mobile: 0812.8140.0749 / 0812.8770.5470 | Chat : Whats App, Line, WeChat, Telegram
Website : www.moraanugerah.id – www.moraanugerah.com
Email : info@moraanugerah.com – marketing@moraanugerah.com – marketing_div@moraanugerah.com