No.162-FS
Standard : JIS-K7125, P8147, ASTM-D3247, ISO-8295, TAPPI-T816
- This tester is used to measure the friction coefficient of plastic film and paper according to the horizontal method.
- The operator is to attach the test specimen to the sliding surface and sliding sled, then pull the sled with a metal wire that is connected to a load cell to acquire the static coefficient of friction and dynamic coefficient of friction.
Specification
| Test Method | Paper and Paperboard | Plastic Film |
| Abrading Head | W60 mm, L100 mm, Mass 1,000 g | 63 × 63 mm (Abrading Surface 40 cm2) Mass 200 ± 2 g (1.96 ± 0.02 N) |
| Flat Board | W200 mm, L380 mm | W200 mm, L380 mm |
| Specimen | Surface: W100 mm, L250 mm Sled: W60 mm, L120 mm |
W80 mm, L200 mm, T0.5 mm or Less |
| Friction Measuring | Load Cell: Max. 10 N, 20 N, 50 N | Load Cell: Max. 10 N, 20 N, 50 N |
| Speed | 10.0 ± 0.2 mm/min | 100 ± 10 mm/min or 500 ± 10 mm/min |
| Accessories | ― | Accessory Plate (Mass Less than 5 g) |
| Option | Variable Speed Spec, Software, Recorder, Heating Plate Spec. | Variable Speed Spec, Software, Recorder, Heating Plate Spec. |
| Power Source | AC 100 V, 1-Phase, 5 A, 50/60 Hz | AC 100 V, 1-Phase, 5 A, 50/60 Hz |
| Dimensions/ Weight (Approx.) | W570 × D280 × H330 mm, 27 kg | W570 × D280 × H330 mm, 27 kg |
Untuk informasi lebih lengkap dari SLIP TESTER (HORIZONTAL METHOD) :
Download Here :
SLIP TESTER (HORIZONTAL METHOD) CATALOGUE
