O-Y PULL SLIP TESTER

O-Y Pull Slip Tester
Standard Method : JIS-A1454, A1509-12
This tester evaluates the slippage of floor material.
The coefficient of slip resistance can be measured by the maximum tensile load at the point when the test specimen and the slip head touch each other.
When the test specimen and the slip head touch each other, the slip head is pulled 18° upwards at a prescript load speed to acquire the maximum tensile load for the calculation of the coefficient of slip resistance (C.S.R) As an option, slippage of clay tile can also be tested.
In addition to the usual C.S.R, C.S.R-B can also be calculated

SPECIFICATION O-Y PULL SLIP TESTER
Specimen	100 × 120 mm (Ceramic Tile: 90 × 135 mm)
Sled	80 × 70 mm
Vertical Weight Load	Initial 294 N (30 kgf) to Max. 785 N (80 kgf) (Standard: 785 N)
Tension Angle	18°
Tension Load Measuring	Load Cell, Max. 5 kN (Scale 1 N)
Tension Load Speed	785 N/s
Software	Windows Compatible
Option	Specimen Holder (Standard and Nosing Edge type), Ceramic Tile Spec (with Sled, Testing Powder, C.S.R.-B Measuring Software)
Power Source	AC 100 V, 1-Phase, 10 A, 50/60 Hz
Dimensions/ Weight (Approx.)	Tester Body: W1,500 × D500 × H1,100 mm, 300 kg Control Box: W230 × D310 × H210 mm, 5 kg