Two Gang Mould & Three Gang Mould

PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak dalam bidang laboratorium khususnya material testing untuk konstruksi/pertambangan (civil laboratorium testing equipment), peralatan yang kami supply meliputi : alat lab uji tanah (soil test equipment),alat lab uji aggregates (aggregates test equipment),alat lab uji beton (concrete test equipment).alat lab uji sement (cement test equipment),alat lab uji aspal (asphalt test equipment),alat NDT (Non Destructive Test Equipment) dan Alat Survey.

MOULDS FOR EXPANSION AND SHRINKAGE

Steel moulds in compliance with ASTM and BS standards with two or three compartments, equipped with special pegs that allow the extraction of ready-made specimens to be tested with linear change gauges.

Two Gang Mould & Three Gang Mould

E072 Two Gang Prism Mould, ASTM (Cement – Mortar)

Standard Method : ASTM C490
Two gang prism mould to produce 25 x 25 x 250 mm specimens for expansion tests in autoclave. Complete with 4 steel inserts.
Weight: 6 Kg approx
Click Here : Two Gang Prism Mould ASTM, Brochure

================

E073 Two Gang Prism Mould, BS ( Cement – Mortar )

Standard Method : BS 1881 BS 6073
Two gang prism mould to produce 75 x 75 x 254 mm specimens. Complete with 4 steel inserts.
Weight: 9 Kg approx.
Click Here : Two Gang Prism Mould BS, Brochure

================

E075 Three Gang Prism Mould ( Cement – Mortar )

Standard Method : EN 12617-4 COMPARABLE TO ASTM C438 COMPARABLE TO NF P15-433
FOR 40.1 x 40 x 160 mm MORTAR SPECIMENS
Used for the determination of linear shrinkage of cement mortar.
Manufactured from steel with hardness over 200 HV. All surfaces are grinded and all parts are marked with an identification number for a correct assembling.
A part-number is engraved on each mould and a Certificate of Conformity is supplied along with. Complete with 6 steel inserts and fixing screws.
Weight: 8.6 Kg approx.
Click Here : Three Gang Prism Mould, Brochure

================

E107 Three Gang Prism Mould, NF – DIN ( Cement – Mortar )

Standard Method : NF P15-434 DIN 1164
Three gang prism mould to produce 40x40x160 mm specimens. Made from steel 55 HRB. Complete with 6 inserts.
Weight: 8 Kg approx.
Click Here : Three Gang Prism Mould, NF-DIN Brochure

================

Two Gang Mould & Three Gang Mould

E113 Three Gang Prism Mould, NF P18-427 ( Cement – Mortar )

Standard Method : NF P18-427
Three gang prism mould to produce 70,7×70,7×282,8 mm specimens.
Made from steel 55 HRB. Complete with 6 inserts.
Weight : 17 Kg
Click Here : Three Gang Prism Mould,NF P18-427 Brochure

================

E115 Three Gang Prism Mould, UNI 8147 ( Concrete – Cement – Mortar )

Standard Method : UNI 8147
Three gang prism mould to produce 50 x 50 x 250 mm specimens.
Weight: 10 kg approx.
Click Here : Three Gang Prism Mould, UNI 8147 Brochure

================

E110 Three Gang Cube Mould 50mm ( Cement – Mortar )

Made from steel, hardness 55 HRB, it can be also used for soil and other materials.
Weight: 6 Kg approx.
Click Here : Three Gang Cube Mould 50mm Brochure

================

Two Gang Mould & Three Gang Mould

E110-01 Three Gang Mould for Cubes ( Cement – Mortar )

Ground steel mould for three cubes 40mm sides.
Dimensions : 190 x 100 x 47 mm approx.
Weight : 2 kg approx.
Click Here : Three Gang Mould for Cubes Brochure

================

E112 Three Gang Mould, NF P18-401 ( Cement – Mortar )

Standard Method : NF P-18-401
Three gang mould, steel made, for 70 x 70 x 282.8 mm prisms.
Weight : 17 Kg approx.
Click Here : Three Gang Mould,NF P18-401, Brochure

================

E105 Three Gang Mould,Hardness 55 HRB ( Cement – Mortar )

Standard Method : NF P15-413 ASTM C348 DIN 1164 DIN 1060
Three gang mould for prisms 40 x 40 x 160 mm.
Made from steel, hardness 55 HRB, it conforms to the above mentioned Specifications.
Weight: 8 Kg approx.
Click Here : Three Gang Mould,Hardness 55 HRB Brochure

================

Two Gang Mould & Three Gang Mould

E103 Three Gang Verified Mould

( Cement – Mortar )

Standard Method : EN 196-1 EN ISO 679
Three gang verified moulf for 40.1x40x160 mm prisms.
Identical in shape to model E102, but manufactured from heavy duty steel with hardness of inside walls over HV 500 (EN196/1 Specifications recommend hardness HV 400). This high hardness value keeps the mould within the tolerances requested by Spec. for many tests, granting very long utilisation life.
All parts are marked with an identification number for a correct assembling. Each mould is individually verified in the dimensional tolerances, hardness, squareness, flatness and roughness with instruments periodically certified by Namas Centre or equivalent. A part-number is engraved on each mould, and a Certificate of Conformity is supplied along with.
Weight : 8560 g.
Click Here : Three Gang Verified Mould Brochure

================

E104 Three Gang Mould for Prisms 40.1 x 40 x 160 mm

Standard Method : EN 196
Three gang verified mould for prisms 40.1x40x160 mm. Similar to mod. E103, but with:
Large base (mm) : 240 x 245
Weight : 11.850 Kg
Manufactured expressly for “Italcementi Group” cement factory.
Click Here : Three Gang Mould for Prism 40.1x40x160 mm Brochure

================

E110-01 Three Gang Mould for Cubes ( Cement – Mortar )

Ground steel mould for three cubes 40mm sides.
Dimensions : 190 x 100 x 47 mm approx.
Weight : 2 kg approx.
Click Here : Three Gang Mould for Cubes Brochure

PT.Mora Anugerah Berkat adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan laboratorium untuk sipil/pertambangan seperti Matest – Two Gang Mould and Three Gang Mould, kami juga menyediakan peralatan baik lokal maupun custom (khusus) yang sudah teruji dan sesuai dengan ASTM,kami juga menyediakan berbagai brand/merk internasional dari USA,Eropa dan China,produk internasional yang kami supply/tawarkan seperti : MATEST, GILSON, FORNEY, HUMBOLDT, CONTROL, ELE, UTEST, RETSCH, Endecotts, HMP, PROCEQ, HILTI dan lain – lain.

Two Gang Mould & Three Gang Mould

Kami juga menyediakan Jasa Perbaikan (SERVICE),Jasa Perawatan (Maintenace) dan support untuk KALIBRASI/AKSESSORIES SPAREPART jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda

PT. Mora Anugerah Berkat (M.A.B)
Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang – Provinsi Banten
Phone : 021 7345.7064 / 7366.0160
Mobile: 0812.8140.0749 / 0812.8770.5470
Chat : Whats App, Line, WeChat, Telegram
Website : www.moraanugerah.id – www.moraanugerah.com
Email : info@moraanugerah.com – info@moraanugerah.id -marketing_div@moraanugerah.com

================

Three Gang Mould

admin

See Full Bio

Two Gang Mould & Three Gang Mould

Two Gang Mould & Three Gang Mould

MOULDS FOR EXPANSION AND SHRINKAGE

Steel moulds in compliance with ASTM and BS standards with two or three compartments, equipped with special pegs that allow the extraction of ready-made specimens to be tested with linear change gauges.

Two Gang Mould & Three Gang Mould

E072 Two Gang Prism Mould, ASTM (Cement – Mortar)

Standard Method : ASTM C490

Two gang prism mould to produce 25 x 25 x 250 mm specimens for expansion tests in autoclave. Complete with 4 steel inserts.

Weight: 6 Kg approx

Click Here : Two Gang Prism Mould ASTM, Brochure

================

E073 Two Gang Prism Mould, BS ( Cement – Mortar )

Standard Method : BS 1881 BS 6073

Two gang prism mould to produce 75 x 75 x 254 mm specimens. Complete with 4 steel inserts.

Weight: 9 Kg approx.

Click Here : Two Gang Prism Mould BS, Brochure

================

E075 Three Gang Prism Mould ( Cement – Mortar )

Standard Method : EN 12617-4 COMPARABLE TO ASTM C438 COMPARABLE TO NF P15-433

FOR 40.1 x 40 x 160 mm MORTAR SPECIMENS

Used for the determination of linear shrinkage of cement mortar.

Manufactured from steel with hardness over 200 HV. All surfaces are grinded and all parts are marked with an identification number for a correct assembling.

A part-number is engraved on each mould and a Certificate of Conformity is supplied along with. Complete with 6 steel inserts and fixing screws.

Weight: 8.6 Kg approx.

Click Here : Three Gang Prism Mould, Brochure

================

E107 Three Gang Prism Mould, NF – DIN ( Cement – Mortar )

Standard Method : NF P15-434 DIN 1164

Three gang prism mould to produce 40x40x160 mm specimens. Made from steel 55 HRB. Complete with 6 inserts.

Weight: 8 Kg approx.

Click Here : Three Gang Prism Mould, NF-DIN Brochure

================

Two Gang Mould & Three Gang Mould

E113 Three Gang Prism Mould, NF P18-427 ( Cement – Mortar )

Standard Method : NF P18-427

Three gang prism mould to produce 70,7×70,7×282,8 mm specimens.

Made from steel 55 HRB. Complete with 6 inserts.

Weight : 17 Kg

Click Here : Three Gang Prism Mould,NF P18-427 Brochure

================

E115 Three Gang Prism Mould, UNI 8147 ( Concrete – Cement – Mortar )

Standard Method : UNI 8147

Three gang prism mould to produce 50 x 50 x 250 mm specimens.

Weight: 10 kg approx.

Click Here : Three Gang Prism Mould, UNI 8147 Brochure

================

E110 Three Gang Cube Mould 50mm ( Cement – Mortar )

Made from steel, hardness 55 HRB, it can be also used for soil and other materials.

Weight: 6 Kg approx.

Click Here : Three Gang Cube Mould 50mm Brochure

================

Two Gang Mould & Three Gang Mould

E110-01 Three Gang Mould for Cubes ( Cement – Mortar )

Ground steel mould for three cubes 40mm sides.

Dimensions : 190 x 100 x 47 mm approx.

Weight : 2 kg approx.

Click Here : Three Gang Mould for Cubes Brochure

================

E112 Three Gang Mould, NF P18-401 ( Cement – Mortar )

Standard Method : NF P-18-401

Three gang mould, steel made, for 70 x 70 x 282.8 mm prisms.

Weight : 17 Kg approx.

Click Here : Three Gang Mould,NF P18-401, Brochure

================

E105 Three Gang Mould,Hardness 55 HRB ( Cement – Mortar )

Standard Method : NF P15-413 ASTM C348 DIN 1164 DIN 1060

Three gang mould for prisms 40 x 40 x 160 mm.

Made from steel, hardness 55 HRB, it conforms to the above mentioned Specifications.

Weight: 8 Kg approx.

Click Here : Three Gang Mould,Hardness 55 HRB Brochure

================

Two Gang Mould & Three Gang Mould

E103 Three Gang Verified Mould

( Cement – Mortar )

Standard Method : EN 196-1 EN ISO 679

Three gang verified moulf for 40.1x40x160 mm prisms.

Weight : 8560 g.

Click Here : Three Gang Verified Mould Brochure

================

E104 Three Gang Mould for Prisms 40.1 x 40 x 160 mm