Taber Type Abrasion Test 

 

 

 

Taber Type Abrasion Test  

 

PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak dalam bidang industrial testing khususnya untuk pengujian material pada industri / manufacture seperti pada industri bidang (plastic,rubber,tape dan polymer), industri bidang (tinta,pewarnaan,chemical),industri bidang (kertas/paper,pulp) dan industri bidang (garment,textile,yarn dll) dengan inovasi PT.Mora Anugerah Berkat ingin menjadi one stop solution atas kebutuhan industrial testing material yang di butuhkan bagi industri / manufactur yang ada di indonesia.

No.101 Taber Type Abrasion Tester

Standard :

JIS-A1453, K5400, K5600-5-8/9, K5665, K6264-2, K6404-4, K6902, K7204, (L1018), L1085, L1096, ASTM-D1044, TAPPI-T476, JAS (JASO-M403), ISO-4649, 5470-1, 7784-½, 9352

 

Description

• This tester is used to evaluate the abrading endurance of flat surface materials when they are abraded with an abrading wheel.

• The operator is to place the abrading wheel to the rotating test specimen at a prescript load and abrade  Taber Type Abrasion Tester the test specimen.

• After the test is finished, the operator is to measure the abraded mass, volume, thickness, and the optical difference of the test specimen.

• This tester is widely used in testing plastic, rubber, decorative sheet, leather, paper, and paint surface.

 

Model	No.101-H TABER TYPE ABRASION TESTER
Turn Table	φ150 mm
Table Rotation Speed	60 ± 2 rpm, 70 ± 2 rpm
Weight Load	2.45 N (250 gf), 4.9 N (500 gf), 9.8 N (1,000 gf)
Counter	6 Digits Preset Counter
Suction Nozzle	Inner φ8 mm: 2 pcs
Option	Inlet Pressure Gauge,Safety Cover
Accessories	Abrasion Wheel : 1 set (2 sets for No.101-H-2), Thickness Guage : 2 pcs, Suction Device (Vacuum Cleaner) : 1 set (2 sets for No.101-H-2)
Power Source	1 Hanging (No.101-H-1): AC 100 V, 1-Phase, 15 A, 50/60 Hz 2 Hangings (No.101-H-2): AC 100 V, 1-Phase, 15 A, 50/60 Hz *2 outlets required
Dimensions / Weight (Approx.)	1 Hanging (No.101-H-1): Approx. W370 × D390 × H450 mm/ 24 kg 2 Hangings (No.101-H-2): Approx. W740 × D390 × H450 mm/ 50 kg

Taber Type Abrasion Test 

No.101-K Sander (For Abrasion Wheel)
Tool	Diamond
Rotation Speed	Approx. 1,400 rpm (50 Hz) Approx. 1,700 rpm (60 Hz)
Power Source	AC 100 V, 1-Phase, 3 A, 50/60 Hz
Dimensions / Weight (Approx.)	Approx. W210 × D350 × H390 mm/ 12 kg

Description

Model	No.101-HS TABER TYPE ABRASION TESTER (WITH WIND METER)
Turn Table	φ150 mm
Table Rotation Speed	60 ± 2 rpm, 70 ± 2 rpm, 72 ± 2 rpm
Weight Load	2.45 N (250 gf), 4.9 N (500 gf), 9.8 N (1,000 gf)
Counter	6 Digits Preset Counter
Suction Nozzle	Inner φ8 mm: 2 pcs
Option	Safety Cover
Accessories	Abrasion Wheel : 1 set (2 sets for No.101-H-2), Thickness Guage : 2 pcs, Suction Device (Vacuum Cleaner) : 1 set (2 sets for No.101-H-2)
Power Source	AC 100 V, 1-Phase, 15 A, 50/60 Hz
Dimensions / Weight (Approx.)	Approx. W370 × D400 × H390 mm/ 30 kg

PT. Mora Anugerah Berkat adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan pengujian industrial seperti Taber Type Abrasion Test , kami juga menyediakan berbagai brand/merk internasional dari USA, Eropa dan China, Kami juga menyediakan Jasa Perbaikan (SERVICE), Jasa Perawatan (Maintenace) dan support untuk KALIBRASI / AKSESSORIES SPAREPART jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda.