Steel Ball Drop Impact Testing

PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat material testing equipment khusus industrial testing seperti pengujian plastic, rubber, film/tape dan polymer salah satu diantaranya yang kami supply adalah Falling Ball Impact Test.

Steel Ball Drop Impact Testing

No.183 Falling Ball Impact Tester

Standard Method :

JIS-(K5400), K5600-5-3, (K6718), (K6745), K7211, ISO-6272

This tester is used to evaluate the impact resistance of rigid plastic, coating etc.
The operator is to observe the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height.
No.183 Falling Ball Impact Tester Brochure
Click Here : Plastic, Rubber, Film & Polymer Catalog Yasuda Seiki
Click Here : Plastic, Rubber, Film & Polymer Catalog

SPECIFICATION No.183 FALLING BALL IMPACT TESTER
Falling Height	50 to Max. 1,000 mm (Pitch 50 mm)
Falling Height	50 to Max. 2,000 mm (Pitch 50 mm)
Falling Weight	Depends on the Standards
Specimen Holder	Depends on the Standards
Accessories	Spirit Level: 1 pc, Foot Switch
Power Source	AC 100 V, 1-Phase, 3 A, 50/60 Hz
Dimensions /	Tester Body: W660 × D460 × H2,
Dimensions /	000 to 2,500 mm,
Weight (Approx.)	100 to 115 kg
Weight (Approx.)	Control Box: W200 × D280 × H215 mm, 7 kg

Steel Ball Drop Impact Testing

No.181 FILM IMPACT TESTER

Standard Method : ASTM-D3420
This tester is used to evaluate the impact resistance of rigid plastic, coating etc.
The operator is to observe the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height.
Click Here : No.183 Falling Ball Impact Tester Brochure
Click Here : Plastic, Rubber, Film & Polymer Catalog Yasuda Seiki
Click Here : Plastic, Rubber, Film & Polymer Catalog

No.181-L FILM IMPACT TESTER (With Refrigerating Machine)

Standard Method : ASTM-D3420
This tester is used to evaluate the impact hole punching endurance of plastic film, paper etc.
A hemispherical impact ball is attached to the head of the pendulum so that the impact workload to punch a hole into the test specimen can be directly read on the scale.
The tester can also be assorted with a low temperature chamber to conduct the impact test at low temperature.
Click Here : No.181 FILM IMPACT TESTER Brochure
Click Here : Plastic, Rubber, Film & Polymer Catalog Yasuda Seiki
Click Here : Plastic, Rubber, Film & Polymer Catalog

SPECIFICATION FILM IMPACT TESTER
Model	NO.181 FILM IMPACT TESTER	NO.181-L FILM IMPACT TESTER (WITH REFRIGERATING MACHINE)
Capacity	0 to 1.5 J (Scale 0.05 J),0 to 3.0 J (Scale 0.1 J) (2 ranges) 0 to 3.0 J (Scale 0.1 J), 0 to 6.0 J (Scale 0.2 J)	0 to 1.5 J (Scale 0.05 J),0 to 3.0 J (Scale 0.1 J) (2 ranges) 0 to 3.0 J (Scale 0.1 J),0 to 6.0 J (Scale 0.2 J)
Impact Head	Hemispherical shape, R12.7 mm, R6.35 mm	Hemispherical shape, R12.7 mm, R6.35 mm
Lift-Up Angle	90° (Additional Weight type)	60°, 90° (2 Stage Type)
Specimen	φ80 mm	φ80 mm
Clamp	Inner φ60 mm	Inner φ60 mm
Temperature Range	―	-35 °C to 60 °C (Refrigerator)
Option	Digital Display Ver.	Digital Display Ver.
Power Source	―	AC 200 V, 3-Phase, 20 A, 50/60 Hz
Dimensions / Weight (Approx.)	W600 × D190 × H460 mm, 32 kg	W1,080 × D700 × H930 mm, 150 kg

Berikut ini adalah daftar alat uji (testing equipment) untuk berbagai pengujian material testing YASUDA SEIKI sebagai berikut :

YASUDA SEIKI
Material : Plastic, Rubber, Tape Film and Polymer
Page	Nama Alat Testing	Code No
1	TABER TYPE ABRASION TESTER	101
1	GEER TYPE AGING OVEN	102
2	WILLIAM TYPE PLASTOMETER	105
	AUTOMATIC WILLIAM TYPE PLASTOMETER	105 AUTO
	SCHOPPER TYPE SAMPLE CUTTER	115
3	OLSEN TYPE STIFFNESS TESTER FOR HEAVY LOAD	118
	DIGITAL OLSEN TYPE STIFFNESS TESTER FOR HEAVY LOAD	118 D
	DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER	119
	DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER WITH LOW TEMP. OVEN	119 L
4	DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER WITH LOW TEMP. OVEN (WITH A PICTURE BREAK DETECTION FUNCTION)	119- LVR
5	MELT FLOW INDEX TESTER	120-FWP
	FULLY AUTOMATIC MELT FLOW INDEX TESTER	120 LABOT-MI
	AUTOMATIC MELT FLOW INDEX TESTER	120 SAS-2000
6	BRITTLENESS TEMPERATURE TESTER	121
	R BRITTLENESS TEMPERATURE TESTER (WITH REFRIGERATING MACHINE)	121
	RA BRITTLENESS TEMPERATURE TESTER (ROTARY HOLDER TYPE)	121
7	FULLY AUTOMATIC BRITTLENESS TEMPERATURE TESTER	121 AUTO
	TEST TUBE AGING TESTER	122
	SCHOPPER TYPE THICKNESS GAUGE	128/129
8	AUTOMATIC CAPILLARY RHEOMETER FOR LIGHT LOAD	140-SAS-2002
8	AUTOMATIC CAPILLARY RHEOMETER FOR HEAVY LOAD	140-SAS-2005
9	CREEP TESTER FOR LIGHT LOAD	145-A
	CREEP TESTER FOR HEAVY LOAD	145-B
	MIXED CREEP TESTER（STRESS RELAXATION TESTER）	145-C
10	RETENTIVITY TESTER	145-D
	TR TESTER	145-L
	SERVOMOTOR TYPE CREEP TESTER	145-SVS
11	GEHMAN STIFFNESS TESTER	145-G
	FULLY AUTOMATIC HEAT DISTORTION TESTER	148-HDA
	HEAT DISTORTION TESTER	148-HD-PC
12	HIGH TEMPERATURE HEAT DISTORTION TESTER	148-HD-500
	STRESS-CRACKING TESTER	149
	LAMBOURN ABRASION TESTER	150
13	DIN ABRASION TESTER	151
13	DIN ABRASION TESTER WITH OVEN	151-OV
14	GEL TIME TESTER	153
14	GEL TIME TESTER（CONTINUOUS RECORD TYPE）	153
15	MARON MECHANICAL STABILITY TESTER	156
	AUTOMATIC MARON MECHANICAL STABILITY TESTER	156-AUTO
	FLOOR MATERIAL FATIGUE AND ABRASION TESTER BY CASTER	159
16	SLIP TESTER	162
	SLIP TESTER(HORIZONTAL METHOD)	162-FS
	5 HANGINGS SLIP TESTER	162-S5
17	O-Y PULL SLIP TESTER	162-OY
	CLASH-BERG TORSION FLEXIBILITY TESTER	170
	AUTOMATIC CLASH-BERG TORSION FLEXIBILITY TESTER	170-AUTO
	COMPRESSION SET TESTER	171
18	FILM IMPACT TESTER	181
	FILM IMPACT TESTER WITH LOW TEMP. OVEN	181-L
	FALLING BALL IMPACT TESTER	183
19	BALL TACK TESTER	183-BT
	FALLING DART IMPACT TESTER	183-S
	MCBURNEY INDENTATION TESTER	184-A
	RESIDUAL INDENTATION TESTER	184-B
20	OZONE AGING TESTER	187
	PLASTIC SAMPLE CUTTING MACHINE	189-PAL
	AUTOMATIC SAMPLE FORMING MACHINE	189-PFA
21	NOTCHING MACHINE	189-PN
	AUTOMATIC NOTCHING MACHINE	189-PNA/PNCA
	TEST MIXING ROLL	191-TM/WM
22	ELECTRIC HEATING SYSTEM TEST PRESS	196
22	LUPKE TYPE REBOUND RESILIENCE TESTER	200
23	YSS HEAT SEALER	212
	JIS HEAT SEALER	213
	OXYGEN INDEX FLAMMABILITY TESTER	214
24	ELECTRIC HEATING SYSTEM MINI TEST PRESS	219
	DART IMPACT TESTER	220
	PLASTIC FLAMMABILITY TESTER	252-UL-94
25	UNIVERSAL IMPACT TESTER	258
	DIGITAL IMPACT TESTER	258-D
	IMPACT TESTER WITH LOW TEMP. OVEN	258-L
26	FULLY AUTOMATIC IMPACT TESTER	258-ZA
26	FOAM RUBBER REPEATED COMPRESSION TESTER	260
27	ROSS FLEXING TESTER	270
27	ROSS FLEXING TESTER WITH LOW TEMP. OVEN	270-LFR
28	HEAT SEAL TESTER	276
	PLASTIC SLIDING ABRASION TESTER	283
	WILLIAM TYPE ABRASION TESTER	275
59	DU PONT TYPE FALLING IMPACT TESTER	517
59	DU PONT TYPE FALLING IMPACT TESTER WITH LOW TEMP. OVEN	517-L
66	ELECTRIC SYSTEM PENCIL SCRATCH HARDNESS TESTER	553-M
66	PENCIL SCRATCH HARDNESS TESTER	553
67	FULLY AUTOMATIC PENCIL SCRATCH HARDNESS TESTER	553-AUTO
67	PENCIL SCRATCH HARDNESS TESTER (LOADCELL TYPE)	553-F

========================================================================================================

YASUDA SEIKI
Material : Paint , Pigment , Ink , Color Testing Machine
Page	Nama Alat Testing	Code No
1	TABER TYPE ABRASION TESTER	101
18	FALLING BALL IMPACT TESTER	183
44	WATER VAPOUR PERMEABILITY CUP	318
49	WATER VAPOUR PERMEABILITY CHAMBER	367
51	CROCK METER	416
52	COLOUR FASTNESS RUBBING TESTER	428
56	FLOW CUP	505
	SPREAD METER	506
	AUTOMATIC SPREAD METER	506-PCM
57	WET FILM THICKNESS GAUGE	507
	BAKER TYPE FILM APPLICATOR	510
	PAINT FILM BENDING TESTER	514
58	ERICHSEN CUPPING TESTER	516
58	ELECTRIC SYSTEM ERICHSEN CUPPING TESTER	516-M
59	DU PONT TYPE FALLING IMPACT TESTER	517
	DU PONT TYPE FALLING IMPACT TESTER WITH LOW TEMP. OVEN	517-L
	MERCURY LAMP FADE METER	518
60	DRAWING TESTER ON PAINT FILM	519
	ZAHN VISCOSITY CUP	522
	PRINT INK DRYING TESTER	524
61	GRIND METER	527/547
	SUTHERLAND TYPE RUB TESTER	528
	DENSITY CUP	536
62	GARDNER TYPE FALLING SAND ABRASION TESTER	541
	AUTOMATIC FILM APPLICATOR	542-AB
	AUTOMATIC FILM APPLICATOR (HEATING PLATE TYPE)	542-AB-H
63	AUTOMATIC FILM APPLICATOR (CERAMIC PLATE TYPE)	542-CR
63	AUTOMATIC HOOVER MULLER	546
64	SAG TESTER	548-CKG
	FILM APPLICATOR (DOCTOR BLADE)	548-YKG
	NO PICK UP TIME TESTER FOR TRAFFIC PAINT	549
65	CROSS CUT EXFOLIATION TESTER	551
	AUTOMATIC CROSS CUT EXFOLIASION TESTER	551-AUTO
	GARDNER TYPE WASHABILITY TESTER	552
66	PENCIL SCRATCH HARDNESS TESTER	553
	ELECTRIC SYSTEM PENCIL SCRATCH HARDNESS TESTER	553-M
	HAND PUSH PENCIL SCRATCH HARDNESS TESTER	553-S
67	PENCIL SCRATCH HARDNESS TESTER (LOADCELL TESTER)	553-F
	FULLY AUTOMATIC PENCIL SCRATCH HARDNESS TESTER	553-AUTO
	VOLUME DENSITY METER	558
68	RCI TYPE DRYING TIME RECORDER	567
68	BARCOATER

Jika anda membutuhkan/mencari alat Steel Ball Drop Impact Testing. yang banyak di gunakan untuk pengujian material plastik,jangan ragu untuk menghubungi kami,marketing dan sales kami siap memjawab segala kebutuhan anda khususnya untuk alat uji Falling Ball Impact Testing Machine .

Steel Ball Drop Impact Testing

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di :

PT. Mora Anugerah Berkat (M.A.B)
Click Here : Plastic, Rubber, Film & Polymer Catalog Yasuda Seiki
Click Here : Plastic, Rubber, Film & Polymer Catalog
Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan, Kota Tangerang – Provinsi Banten
Phone : 021 7345.7064
Mobile : 0812.8140.0749 / 0812.8770.5470 ( Chat : Whats App, Line, WeChat, Telegram )
Website : http://moraanugerah.id/ – http://moraanugerah.com/
Email : info@moraanugerah.com – info@moraanugerah.id – marketing_div@moraanugerah.com

Steel Ball Drop Impact Testing

PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat material testing equipment khusus industrial testing seperti pengujian plastic, rubber, film/tape dan polymer salah satu diantaranya yang kami supply adalah Falling Ball Impact Test.

Steel Ball Drop Impact Testing

No.183 Falling Ball Impact Tester

Standard Method :

JIS-(K5400), K5600-5-3, (K6718), (K6745), K7211, ISO-6272

This tester is used to evaluate the impact resistance of rigid plastic, coating etc.

The operator is to observe the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height.

SPECIFICATION No.183 FALLING BALL IMPACT TESTER

Falling Height

50 to Max. 1,000 mm (Pitch 50 mm)

50 to Max. 2,000 mm (Pitch 50 mm)

Falling Weight

Depends on the Standards

Specimen Holder

Depends on the Standards

Accessories

Spirit Level: 1 pc, Foot Switch

Power Source

AC 100 V, 1-Phase, 3 A, 50/60 Hz

Dimensions /

Tester Body: W660 × D460 × H2,

000 to 2,500 mm,

Weight (Approx.)

100 to 115 kg

Control Box: W200 × D280 × H215 mm, 7 kg

Steel Ball Drop Impact Testing

No.181 FILM IMPACT TESTER

Standard Method : ASTM-D3420

This tester is used to evaluate the impact resistance of rigid plastic, coating etc.

The operator is to observe the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height.

No.181-L FILM IMPACT TESTER (With Refrigerating Machine)

Standard Method : ASTM-D3420

This tester is used to evaluate the impact hole punching endurance of plastic film, paper etc.

A hemispherical impact ball is attached to the head of the pendulum so that the impact workload to punch a hole into the test specimen can be directly read on the scale.

The tester can also be assorted with a low temperature chamber to conduct the impact test at low temperature.

SPECIFICATION FILM IMPACT TESTER

Model

NO.181

FILM IMPACT TESTER

NO.181-L FILM IMPACT TESTER

(WITH REFRIGERATING MACHINE)

Capacity

0 to 1.5 J (Scale 0.05 J),0 to 3.0 J (Scale 0.1 J)

(2 ranges) 0 to 3.0 J (Scale 0.1 J), 0 to 6.0 J (Scale 0.2 J)

0 to 1.5 J (Scale 0.05 J),0 to 3.0 J (Scale 0.1 J)

(2 ranges) 0 to 3.0 J (Scale 0.1 J),0 to 6.0 J (Scale 0.2 J)

Impact Head

Hemispherical shape, R12.7 mm, R6.35 mm

Hemispherical shape, R12.7 mm, R6.35 mm

Lift-Up Angle

90° (Additional Weight type)

60°, 90° (2 Stage Type)

Specimen

φ80 mm

φ80 mm

Clamp

Inner φ60 mm

Inner φ60 mm

Temperature Range

―

-35 °C to 60 °C (Refrigerator)

Option

Digital Display Ver.

Digital Display Ver.

Power Source

―

AC 200 V, 3-Phase, 20 A, 50/60 Hz

Dimensions / Weight (Approx.)

W600 × D190 × H460 mm, 32 kg

W1,080 × D700 × H930 mm, 150 kg

Berikut ini adalah daftar alat uji (testing equipment) untuk berbagai pengujian material testing YASUDA SEIKI sebagai berikut :

YASUDA SEIKI

Material : Plastic, Rubber, Tape Film and Polymer

Page

Nama Alat Testing

Code No

1

TABER TYPE ABRASION TESTER

101

Dimensions / Weight
(Approx.)