Code : B056 KIT
Standard Method : EN 1426 | ASTM D5 | BS 1377-2 | NF T66-004 | AASHTO T49
Used to determine the consistency of a bituminous sample under fixed conditions of load, time and temperature. The penetration is expressed in distance of tenths of millimeters vertically penetrated by a standard needle.
The standard penetrometer has a sturdy aluminium base table with levelling screws, plated vertical rod, micrometric vertical adjustment device.The slider is brass made with free fall. The dial, graduated in 360°
(division 0.1 mm), has a diameter of 150 mm.The penetrometer is supplied with stop and release push button, automatic zero set, micrometer adjustment,
Set of Weights
50 and 100 g penetration needle,
brass sample cups Ø 55 x 35 mm and 70×45 mm.
Dimensions: 220 x 170 x 410 mm.
Weight: 11 kg approx.
ACCESSORIES for B056 KIT, B057 KIT, B056-01 KIT, B056-02 KIT
V122-08 SAMPLE CUP Ø 55×40 mm, aluminium made to BS 1377-2.
B057-02 MIRROR, for an easier setting of the needle.
B057-03 TRANSFER DISH, made of glass, with support.
B057-06 PENETRATION NEEDLE HARDENED STEEL, 42.5 ± 2.5 mm long supplied with UKAS Verification Certificate.Weight: 2.5 ± 0.05 g
B057-07 PENETRATION NEEDLE HARDENED STEEL, 42.5 ± 2.5 mm long. Each needle is individually verified with engraved serial number, and perfectly meets EN 1426 Specification.Weight: 2.5 ± 0.05 g
B057-01L LONG PENETRATION NEEDLE, not hardened 52.5 ± 2.5 mm. Comparable to EN, to test specimens where the penetration is expected to exceed 35 mm
B057-07L LONG PENETRATION NEEDLE HARDENED 52.5 ± 2.5 mm to EN 1426, to test specimens where the penetration is expected to exceed 35 mm
B057-08 TERMOMETER, IP 38C Range: +23 °C to +26 °C.Grad. 0.1 °C
B089 TERMOMETER, EN, Range: +19 °C to +27 °C. Grad. 0.1 °C – ASTM 17C
B057 KIT
AUTOMATIC DIAL PENETROMETER
Basically structured as mod. B056 KIT but having a magnetic controller device with electronic digital programmable timer that automatically releases the plunger head and ensures free falling of the needle during the 5-seconds test.
Power supply: 230V 1ph 50-60Hz 200W
Dimensions: 220x280x410 mm
Weight: 15 kg approx.
ACCESSORIES
B057 KIT
AUTOMATIC DIAL PENETROMETER
Basically structured as mod. B056 KIT but having a magnetic
controller device with electronic digital programmable timer that
automatically releases the plunger head and ensures free falling of
the needle during the 5-seconds test.
Power supply: 230V 1ph 50-60Hz 200W
Dimensions: 220x280x410 mm
Weight: 15 kg approx.
ACCESSORIES for B056 KIT, B057 KIT, B056-01 KIT, B056-02 KIT
V122-08 SAMPLE CUP Ø 55×40 mm, aluminium made to BS 1377-2.
B057-02 MIRROR, for an easier setting of the needle.
B057-03 TRANSFER DISH, made of glass, with support.
B057-06 PENETRATION NEEDLE HARDENED STEEL, 42.5 ± 2.5 mm long supplied with UKAS Verification Certificate. Weight: 2.5 ± 0.05 g
B057-07 PENETRATION NEEDLE HARDENED STEEL, 42.5 ± 2.5 mm long. Each needle is individually verified with engraved serial number, and perfectly meets EN 1426 Specification. Weight: 2.5 ± 0.05 g
B057-01L LONG PENETRATION NEEDLE, not hardened, 52.5 ± 2.5 mm. Comparable to EN, to test specimens where the penetration is expected to exceed 35 mm
B057-07L LONG PENETRATION NEEDLE HARDENED, 52.5 ± 2.5 mm to EN 1426, to test specimens where the penetration is expected to exceed 35 mm
B057-08 TERMOMETER, IP 38C Range: +23 °C to +26 °C. Grad. 0.1 °C
B089 TERMOMETER, EN, Range: +19 °C to +27 °C. Grad. 0.1 °C – ASTM 17C
Untuk mengetahui lebih detail model/type dan spesifikasi dari Matest – Dial Penetrometer silahkan click link/tautan yang ada di bawah ini :
Matest – Dial Penetrometer Catalogue
