STANDARDS: EN 12697-10, 12697-30 | comparable to: BS 598:107
Code : B031N1
This ruggedly constructed apparatus automatically compacts the bituminous sample and stops off the motor after the preset number of blows has been completed on the automatic digital display counter.
The trip mechanism is structured so that the sliding hammer falls at the same height at every blow.
The mould is held in position by a fast clamping device.
The compactor includes a vibrated concrete base where a laminate hardwood block is mounted.
Total weight of the compaction hammer (Rod + Foot + Sliding mass): 7850 ± 50 g
Sliding mass weight: 4535 ± 15 g
Free fall height: 457 ± 5 mm
Blow frequency: 50 blows in 55/60 seconds
The machine is equipped with safety door, conforming to CE Safety
Directive.
When opened it stops automatically and cannot operate. The control panel can be wall fixed or placed on a bench. All moving parts are quickly/easily accessible for maintenance.
The compactor is supplied complete, except for the mould that must be ordered separately.
Power Supply : 230V 1ph 50Hz 300W
Dimensions : 500 x 500 x 1890 mm
Weight : 220 kg approx.
ACCESSORY
B031-01 CABINET, lined with sound-proofing material for noise reduction within CE limits
Dimensions: 800 x 800 x 2000 mm approx.
Weight: 100 kg approx.
SPARE
B033-11N Compaction Hammer complete
Untuk mengetahui lebih detail model/type dan spesifikasi dari Marshal Automatic EN (Impact) Compactor silahkan click link/tautan yang ada di bawah ini :
Matest : Marshal Automatic EN (Impact) Compactor Catalogue
