Code : B053-10

Standard Method : ISSA TB139, comparable to EN 12274-4 | ASTM D3910

This instrument is used for cohesion tests on the mix, and to determine the proper consistency or mix design for a slurry seal mixture. The pneumatic cylinder incorporated into the unit applies a pressure

to the sample. A hand torque tester supplied with the cohesion unit, measures the torquing strength by determining the complete solidification of the mix.

Supplied complete with torque wrench, 5 moulds Ø 60×6 mm,

5 moulds Ø 60×10 mm, 5 moulds Ø 70×6 mm,

5 moulds Ø 70 x 10 mm accessories, spare parts.

To perform the test an air pressure source is needed.

Dimensions: 400 x 250 x 300 mm approx.

Weight: 20 kg approx

 

ACCESSORIES

V206 AIR COMPRESSOR. 230V 50Hz 1ph.

SQUARE MOULD to EN 12274-4 with 4 holes to prepare the sample:

B053-12 MOULD 140x140x6.3 mm

B053-13 MOULD 140x140x10 mm

B053-14 MOULD 200x200x13 mm

B053-15 MOULD 200x200x19 mm

 

SPARES

B053-16 MOULD Ø 60×6 mm (2 pieces)

B053-17 MOULD Ø 60×10 mm (2 pieces)

B053-18 MOULD Ø 70×6 mm (2 pieces)

B053-19 MOULD Ø 70×10 mm (2 pieces)

Untuk mengetahui lebih detail model/type dan spesifikasi dari Matest Cohesion Tester silahkan click link/tautan yang ada di bawah ini :

 

Matest Cohesion Tester Catalogue