Jual Pundit PL-200 / PL-200PE PROCEQ




Jual Pundit PL-200 / PL-200PE PROCEQ


PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak dalam bidang laboratorium khususnya material testing untuk konstruksi / pertambangan (civil laboratorium testing equipment), peralatan yang kami supply meliputi : alat lab uji tanah (soil test equipment), alat lab uji aggregates (aggregates test equipment), alat lab uji beton (concrete test equipment), alat lab uji sement (cement test equipment), alat lab uji aspal (asphalt test equipment), alat NDT (Non Destructive Test Equipment) dan Alat Survey.


Download PROCEQ NDT Catalog : 


Jual Pundit PL-200 / PL-200PE PROCEQ 


The Pundit PL-200 and PL200PE continue the illustrious Pundit tradition that began in the 1970s.
The first to use a new generation touchscreen display unit.
The Touchscreen unit can control conventional Ultrasonic Pulse Velocity Transducers as the PL-200 and the Pulse Echo Transducer as the PL200 PE.
The world known Pundit range offers users a reliable and accurate method for determining the sonic properties of materials.
The pulse velocity in a material depends on its density and its elastic properties.
These in turn are related to the quality and the strength of the material.


Pundit PL-200 – The new Benchmark for


Ultrasonic testing can be used for:

An essential tool for investigating a wide range of materials. Including Concrete, Ceramics and Refractories, Timber and many others/


Stress Waves
Ultrasonic testing is sub section of stress wave testing. The main characteristics of stress waves in a material are their frequency and the type of wave measured. The correct choice of frequency is based upon the material being tested. Coarse grained concrete responds better to a lower frequency. Fine grained mortars or rock works better with higher frequencies.

The two test methods offered by the Pundit use of either compression waves [P waves] or shear waves. The particle motion associated with compression waves can be described as vibration parallel to the direction of wave travel, much as a sound wave. The particle motion associated with shear waves can be described as vibration perpendicular to the direction of wave travel.

Ultrasonic Pulse Echo Method

The Pulse Echo technology widely extends the application range of the Pundit Touchscreen Unit and offers a variety of special features.
Single side determination of slab thickness
Detection and localization of voids, pipes, cracks (parallel to surface) and honeycombing
Advanced echo tracking technology helps identifying the main echo
Control buttons and optical feedback directly on the probe increase measurement efficiency
Automatic estimation of the Pulse Velocity
Easy B-Scan measuring through centre marker and rulers directly on the probe
Dry-contact transducer: no couplant required, suited for measuring on rough surfaces
Lightweight and ergonomic handling
Pulse Echo Transducer

The Pulse Echo transducer is a shear wave transducer designed for single-handed and two-handed operation. It is particularly suited to testing where access is limited to a single side.

Scan Modes :


A cross-sectional view perpendicular to the scanning surface is provided. It facilitates the search for pipes, cracks, voids, etc.
State-of-the-art image processing for improved image quality.
Cursor placement allows a direct readout of the slab thickness and the location of hidden objects or defects.
In this example a B-Scan of a concrete object containing steel pipes.


A-Scan allows direct analysis of the raw signal.
Digital filters for better echo visibility and noise suppression.
Automatic readout of slab thickness (Echo tracker).

Area Scan

Contour map of results over a concrete surface, either Velocity or thickness values can be mapped.
A gate function can focus the results in the region of most concern such as reflections from the back of a tunnel grout layer.


Transducer Specifications


50 kHz

Aperture Size

2 x 25 cm2

Test Subject Limitations


50 mm

Maximum Grain Size

50 mm

Minimum Lateral Depth

2 x Thickness

Penetration Depth

500 mm (up to 1 m ideal)

Minimum Object Detectable

30 mm Cylindrical Air Pocket


Jual Pundit PL-200 / PL-200PE PROCEQ 


Form Supplied

  • Pundit-PL-200 comes standard with:

  • Pundit Touchscreen

  • 2 Transducers 54 kHz

  • 2 BNC cables 1.5m, BNC Adapter Cable

  • Couplant

  • Calibration Rod

  • Battery Charger, USB cable

  • DVD w. Software, Documentation, Carrying Strap, Case

  • Pundit PL200PE comes standard with:

  • Pundit Touchscreen

  • Pundit Pulse Echo Transducer incl. cable

  • Contact tester

  • Battery charger, USB cable

  • DVD w. software, Documentation, Carrying Straps, Case


Download PROCEQ NDT Catalog : 


Technical Specification

Pundit PL-200

Pundit PL-200PE


0.1 – 7930 μs


0.1 μs (< 793 μs), 1 μs (> 793 μs)


7” colour display 800×480 pixels

Pulse Voltage UPV UPE

100 – 450 Vpp


100 – 400 Vpp


20 – 500 kHz

Receiver Gain

1x – 10’000x (0 – 80dB) [11 steps]


Internal 8 GB Flash memory

Regional Setting

Metric and imperial units and multi-language supported


Lithium Polymer, 3.6 V, 14.0 Ah

Battery Lifetime

> 8h (in standard operating mode)


0°C – 30°C (Charging, running instrument)


0°C – 40°C (Charging, instrument is off)

-10°C – 50°C (Non-charging)


< 95 % RH, non condensing

IP Clasification



PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan laboratorium untuk sipil/pertambangan seperti Jual Pundit PL-200 / PL-200PE PROCEQ , kami juga menyediakan berbagai brand/merk internasional dari USA, Eropa dan China,produk internasional yang kami supply/tawarkan seperti : MATEST, GILSON, FORNEY, HUMBOLDT, CONTROL, ELE, UTEST, RETSCH, Endecotts, HMP, PROCEQ, HILTI dan lain – lain ; Kami juga menyediakan Jasa Perbaikan (SERVICE), Jasa Perawatan (Maintenace) dan support untuk KALIBRASI / AKSESSORIES SPAREPART jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda.

Jual Pundit PL-200 / PL-200PE PROCEQ