Jual [No.120-SAS] Melt Flow Index Tester Automatic – Yasuda Seiki

/ BLOG / By

Jual [No.120-SAS] Melt Flow Index Tester Automatic – Yasuda Seiki

 

 

 

Jual [No.120-SAS] Melt Flow Index Tester Automatic – Yasuda Seiki

 

PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak dalam bidang industrial laboratorium testing equipment khususnya plastik, rubber, film/tape and polymer material testing salah satu diantaranya adalah Jual [No.120-SAS] Melt Flow Index Tester Automatic – Yasuda Seiki , berikut adalah tipe dan spesifikasi dari Melt Flow Index Analyzer Yasuda Seiki seperti di bawah ini :

Tester for Melt Viscosity Property, Flowability, Melt Flow Rate (MFR/MVR) of Resin

  • No.120-SAS MELT FLOW INDEX TESTER (AUTOMATIC)

  • Standard Method : JIS-K6719-1/2, K6921-2, K6922-2, K6923-1, K6924-1, K6926-2, K7210, ASTM-D1238, ISO-1133

  • This tester is used to measure the melt flow index of thermo-plastic.

  • The melt flow index is acquired from the weight or the volume of the extruded specimen at a specified cylinder temperature and with a specified load of piston through the die.

  • The tester is assorted with an automatic cleaning system which enables to perform 1 test cycle without discontinuation (option of 3 test cycles).

  • Click Here : Melt Flow Index Tester Catalogue

  • Click Here : Plastic and Rubber Testing Brochure

Jual [No.120-SAS] Melt Flow Index Tester Automatic – Yasuda Seiki

 

No.120-SAS MELT FLOW INDEX TESTER (AUTOMATIC)

Specification

Hangings

1 or 3 Hangings (2 kinds)

Die

φ2.095 ± 0.005 mm, L8.000 ± 0.025 mm

Piston

Head Diameter φ9.474 ± 0.007 mm,
Head Length L6.35 ± 0.10 mm

Cylinder

Inner φ9.550 ± 0.007 mm, L160 mm

Temperature Range

Max. 300 °C (Option: Max. 400 °C)

Weight Loading

Choose the Largest Load from 0.325, 1.20, 2.16, 3.80, 5.00, 10.00, 21.60 kgf

Test
Method

Method A: Manual (Option: Automatic)
Method B: Automatic

Specimen Feeding

Automatic

Weight Loading

Automatic

Weight Change

Manual (Option: Automatic)

Cylinder Cleaning

Automatic (Solvent Cleaning can also be Automatic)

Die Cleaning

Automatic

Piston Cleaning

Manual (Option: Automatic)

Die Cleaning Rod Cleaning

Manual (Option: Automatic)

Cleaning Gauze Feeding

Manual

Data
Processing

Method A: Manual (Option: Automatic)
Method B: Automatic

Method B Measuring

Rotary Encoder

Software

Windows Compatible

Accessories

Cleaning Rod (Die, Cylinder), Solvent Cleaning Device, Specimen Cup, Cup Holder, Infundibulum, Die Gauge, Spirit Level, Dust Box, Gauze, Air Gun

Hastelloy Spec, Specimen Purging Device, Specimen Drying Device,Air Compressor, Temperature Calibration Device, Exhaust Fan (Standard for No.120-LABOT),Smoke-Detection Sensor (Standard for No.120-LABOT)

Option

AC 200 V, 1-Phase, 10 A, 50/60 Hz
AC 200 V, 1-Phase, 15 A, 50/60 Hz
(ISO-1133-2 Compatable Type)

Air Source

0.5 MPa or More

Power
Source

1 Hanging: W675× D645 × H1,370 mm/200 kg
3 Hangings: W675 × D725 × H1,370 mm/ 220 kg

Air Source

0.5 MPa or More

Dimensions /
Weight (Approx.)

1 Hanging: W675× D645 × H1,370 mm/200 kg
3 Hangings: W675 × D725 × H1,370 mm/ 220 kg

======================================

Jual [No.120-SAS] Melt Flow Index Tester Automatic – Yasuda Seiki

 

  • No.120-LABOT MELT FLOW INDEX TESTER (FULL AUTOMATIC)

  • Standard Method : JIS-K6719-1/2, K6921-2, K6922-2, K6923-1, K6924-1, K6926-2, K7210, ASTM-D1238, ISO-1133

  • This tester is equipped with robotic mechanism which enables fully automatic melt flow index tests up to a maximum of 50 samples (standard of 12 samples).

  • The test conditions and the outputs can be set and observed through the computer software.

  • Click Here : Melt Flow Index Tester Catalogue

  • Click Here : Plastic and Rubber Testing Brochure

 

No.120-LABOT MELT FLOW INDEX TESTER (FULL AUTOMATIC)

Specification

Hangings

12, 24, 50 Hangings (3 kinds)

Die

φ2.095 ± 0.005 mm, L8.000 ± 0.025 mm

Piston

Head Diameter φ9.474 ± 0.007 mm,
Head Length L6.35 ± 0.10 mm

Cylinder

Inner φ9.550 ± 0.007 mm, L160 mm

Temperature Range

Max. 300 °C (Option: 400 °C)

Weight Loading

0.325, 1.20, 2.16, 3.80, 5.00, 10.00 kgf and 21.60 kgf

Test
Method

Method A : Manual (Option: Automatic)
Method B: Automatic

Specimen Feeding

Automatic

Weight Loading

Automatic

Weight Change

Manual (Option: Automatic)

Cylinder Cleaning

Automatic (Solvent cleaning can also be automatic)

Die Cleaning

Automatic

Piston Cleaning

Automatic

Die Cleaning Rod Cleaning

Automatic

Cleaning Gauze Feeding

Automatic

Data
Processing

Method A: Manual (Option: Automatic)
Method B: Automatic

Method B Measuring

Rotary Encoder

Software

Windows Compatible

Accessories

Cleaning Rod (Die & Cylinder), Solvent Cleaning Device,Specimen Cup, Cup Holder, Infundibulum, Die Gauge,Spirit Level, Dust Box, Gauze, Air Gun

Option

Hastelloy Spec, Specimen Purging Device,Specimen Drying Device, Air Compressor, Temperature Calibration Device,Exhaust Fan, Smoke-Detection Sensor

Air Source

0.5 MPa or More

Dimensions /
Weight(Approx.)

Hangings : W950 × D700 × H1,750 mm/ 300 kg50
Hangings: W1,100 × D700 × H1,750 mm/ 350 kg

Power Source

AC 100 V, 1-Phase, 15 A, 50/60 Hz
AC 200 V, 1-Phase, 20 A, 50/60 Hz
(ISO-1133-2 Compatable Type)

======================================

Jual [No.120-SAS] Melt Flow Index Tester Automatic – Yasuda Seiki

 

 

No.120 – FWP Melt Flow Index Tester (Manual)

Specification

Hangings

1 Hanging

Die

φ2.095 ± 0.005 mm,

L8.000 ± 0.025 mm

Piston

Head Diameter φ9.474 ± 0.007 mm,

Head Length L6.35 ± 0.10 mm

Cylinder

Inner φ9.550 ± 0.007 mm, L160 mm

Temperature

Range

Max. 400 °C

Test Load

Initial 0.325 kgf

Choose 1 kind from 1.20 ; 2.16 ; 3.80 ; or 5.00 kgf. (Option: 10.00 and 21.60 kgf)

Test Method

Method A : Manual (Option: Automatic Cutter)

Method B : Automatic

Data

Processing

Method A : Automatic (Measuring the weight of the cut off specimen is done by hand)

Method B : Automatic

Method B Measuring

Rotary Encoder

Standard Specification

SD Card Slot, LAN Port

Option

Mini Printer, Method A Air Pressure Type Automatic Cutter,

Manual Type Die Plug, Safety Cover with Interlock Attached,

Half Die, Air Pressure Type Automatic Loader (No.120-FWP-W)

Accessories

Cleaning Rod (Die & Cylinder), Injection Rod, Funnel,

Die Gauge, Method A Cutting Knife, Spirit Level, Gauze

Power Source

AC 100 V, 1-Phase, 15 A, 50/60 Hz or

AC 200 V, 1-Phase, 10 A, 50/60 Hz

Air Source

0.5 MPa or More

(For Method A Pneumatic Type Weight Loading Device Specification)

Dimensions /

Weight (Approx.)

No.120FWP : W700 × D450 × H1,020 mm / 75 kg

No.120FWP-WP-W : W710 × D450 × H1,060 mm / 120 kg

Berikut adalah link / tautan produk catalog yang kami miliki seperti dibawah ini :  

  1. Click Here : Yasuda Seiki No.145-D Retentivity Tester Brochure 

  2. Click Here : Yasuda Seiki : Plastic, Rubber, Tape & Polymer Catalog

  3. Click Here : Yasuda Seiki : Electric Wire and Cable Catalog

  4. Click Here : Yasuda Seiki : Leather, Vinyl Leather Cloth Catalog

  5. Click Here : Yasuda Seiki : Paper,Pulp Catalog

  6. Click Here : Drick Instrument : Industrial Testing Instrument Catalog 

  7. Click Here : Cell Instrument : Plastic, Rubber, Tape & Polymer Catalog 

  8. Click Here : Testex Instrument Fabric,Garment & Textile Catalog

 

Jika anda membutuhkan/mencari Jual [No.120-SAS] Melt Flow Index Tester Automatic – Yasuda Seiki yang banyak di gunakan untuk pengujian material plastik, jangan ragu untuk menghubungi kami , PT. Mora Anugerah Berkat menyediakan berbagai merek dan brand yang ada di indonesia, marketing dan sales kami siap menjawab segala kebutuhan anda khususnya untuk alat uji Melt Flow Index Test.

Jual [No.120-SAS] Melt Flow Index Tester Automatic – Yasuda Seiki