Jual No.102 Geer Type Aging Oven di Balaraja

Jika anda membutuhkan/mencari peralatan pengujian material testing khususnya untuk Plastik, Rubber, Film, Polymer dan lain-lain, hubungi PT. Mora Anugerah Berkat merupakan perusahaan yang menyediakan / mensupply alat uji seperti No.101 Taber Type Abrasion Tester and No.102 geer Type Aging Oven salah satunya dengan brand Yasuda Seiki Seisakusho Ltd.

No.101-H TABER TYPE ABRASION TESTER
Standard Method : JIS A1453, (K5400), K5600-5-8/9, K5665, K6264-2, K6404-4, K6902, K7204, (L1018), L1085, L1096, ASTM D1044, TAPPI-T476, JAS (JASO-M403), ISO 4649,5470-1, 7784-1/2,
This tester is used to evaluate the abrading endurance of flat surface materials when they are abraded with an abrading wheel.
The operator is to place the abrading wheel to the rotating test specimen at a prescript load and abrade the test specimen.
After the test is finished, the operator is to measure the abraded mass, volume, thickness, and the optical difference of the test specimen.
This tester is widely used in testing plastic, rubber, decorative sheet, leather, paper, and paint surface.9352
Click Here : No.101-H Taber Type Abrasion Tester Brochure
Click Here : Plastic, Rubber, Film and Polymer Testing Equipment

Specification
Model	No.101-H TABER TYPE ABRASION TESTER
Turn Table	φ150 mm
Table Rotation Speed	60 ± 2 rpm, 70 ± 2 rpm, 72 ± 2 rpm
Weight Load	2.45 N(250 gf), 4.9 N(500 gf), 9.8 N (1,000 gf)
Counter	6 Digits Preset Counter
Suction Nozzle	Inner φ8 mm: 2 pcs
Option	Inlet Pressure Gauge,Safety Cover
Accessories	Abrasion Wheel : 1 set (2 sets for No.101-H-2), Thickness Guage : 2 pcs, Weight(4.9N,9.8N) : 2 pcs each, Suction Device (Vacuum Cleaner) : 1 set , Power Plug Adaptor : 1 pc
Power Source	1 Hanging (No.101-H-1) : AC 100 V, 1-Phase, 15 A, 50/60 Hz 2 Hangings (No.101-H-2) : AC 100 V, 1-Phase, 20 A, 50/60 Hz *2 outlets required
Dimensions / Weight (Approx.)	1 Hanging (No.101-H-1) : W350 × D350 × H450 mm/ 25 kg 2 Hangings (No.101-H-2) : W700 × D350 × H510 mm/ 45 kg

Jual No.102 Geer Type Aging Oven di Balaraja

No.101-K Sander (For Abrasion Wheel)
Tool	Diamond
Rotation Speed	1,300 rpm to 1,500 rpm (50 Hz) 1,550 rpm to 1,800 rpm (60 Hz)
Accessories	Power Plug Adaptor: 1 pc
Power Source	AC 100 V, 1-Phase, 3 A, 50/60 Hz
Dimensions / Weight (Approx.)	W210 × D330 × H380 mm/ 10 kg

Jual No.102 Geer Type Aging Oven di Balaraja

No.101-HS TABER TYPE ABRASION TESTER
Standard Method : JIS A1453, (K5400), K5600-5-8/9, K5665, K6264-2, K6404-4, K6902, K7204, (L1018), L1085, L1096, ASTM D1044, TAPPI-T476, JAS (JASO-M403), ISO 4649, 5470-1, 7784-1/2, 9352
This is a tester with Wind Meter attached to No.101-H TABER TYPE ABRASION TESTER.
It sucks the abraded scrap during the test.
Not only that, it measures the air flow while sucking so it enables to have more precise test result.
Click Here : No.101-HS Taber Type Abrasion Tester Brochure
Click Here : Plastic, Rubber, Film and Polymer Testing Equipment

Model	No.101-HS TABER TYPE ABRASION TESTER (WITH WIND METER)
Turn Table	φ150 mm
Table Rotation Speed	60 ± 2 rpm, 70 ± 2 rpm, 72 ± 2 rpm
Weight Load	2.45 N(250 gf), 4.9 N (500 gf), 9.8 N (1,000 gf)
Counter	6 Digits Preset Counter
Suction Nozzle	Inner φ8 mm: 2 pcs
Option	Safety Cover
Accessories	Abrasion Wheel : 1 set (2 sets for No.101-H-2), Thickness Guage : 2 pcs, Weight(4.9N,9.8N) : 2 pcs each, Suction Device (Vacuum Cleaner) : 1 set Power Plug Adaptor : 1 pc
Power Source	AC 100 V, 1-Phase, 15 A, 50/60 Hz
Dimensions / Weight (Approx.)	W400 × D400 × H385 mm/ 25 kg

Jual No.102 Geer Type Aging Oven di Balaraja

No.102 GEER TYPE AGING OVEN
Standard Method : JIS A5756, B7757, C3005, K6257, K6723, K7212, K7368, ASTM D573, D5374, D5423, E145, UL-746B, IEC-60216-4-1, ISO 188,4577
This tester is the most widely used heat aging tester for rubber and plastic.
Unlike ordinary heating ovens, the GEER TYPE AGING OVEN satisfies specifications indispensable to aging tests such as closed mechanism, uniform air velocity in the oven, ventilation rate measurement, and rotating specimen rack, which offers excellent reproducibility and reliable test results.
Click Here : No.102 Geer Type Aging Oven Brochure
Click Here : Plastic, Rubber, Film and Polymer Testing Equipment

Specification
No.102 GEER TYPE AGING OVEN
Inner Dimensions	W450 × D450 × H500 mm	W600 × D600 × H600 mm
Chamber Capacity	225,225 cm3	417,600 cm3
Temperature Range	Room Temperature + 20 to 300 °C *	Room Temperature + 20 to 300 °C *
Air velocity	Low: 0.5 ± 0.1 m/s, High: 1.0 ± 0.2 m/s (Controlled vie touch panel)	Low: 0.5 ± 0.1 m/s, High: 1.0 ± 0.2 m/s (Controlled vie touch panel)
Air Exchange Rate Measurement	Power Consumption Method	Power Consumption Method
Air Exchange Rate Control	Adjustable between 3 to 10 times/hr, 5 to 20 times/hr or over 60 times/hr	Adjustable between 3 to 10 times/hr, 5 to 20 times/hr or over 60 times/hr
Hanger Rotation Speed	7.5 ± 2.5 rpm	7.5 ± 2.5 rpm
Safety Device	Overheat Detection Device, Circuit Braker	Overheat Detection Device, Circuit Braker
Accessories	Specimen Hanger 2 stages, Clip 40 pcs, Shelf 2 pcs
Option	CSV Output, Analog Voltage Output, Miniprinter, UL Type Air Exchange Rate 100 to 200 times/hr, modification
Power source	AC 200 V, 3-Phase, 30 A, 50/60 Hz When Air Exchange Rate is 100 to 200 times/hr; AC 200 V, 3-Phase, 40 A, 50/60 Hz	AC 200 V, 3-Phase, 40 A, 50/60 Hz
Dimensions / Weight (Approx.)	SHF-S : W1,180 × D700 × H1,560 mm/ 300 kg SHF-SA : W1,250 × D700 × H1,650 mm/ 305 kg	SHF-S : W1,350 × D900 × H1,650 mm/ 372 kg SHF-SA : W1,400 × D900 × H1,750 mm/ 375 kg
Model
SHF-S	Equipped with air exchange rate measurement/display via touch panel. Damper is opened/closed manually.
SHF-SA	Equipped with air exchange rate measurement/display via touch panel. Automatic Damper Control.

PT.Mora Anugerah Berkat adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan laboratorium untuk sipil/pertambangan seperti No.101 Taber Type Abrasion Tester & No.102 Geer Type Aging Oven, kami juga menyediakan peralatan baik lokal maupun custom (khusus) yang sudah teruji dan sesuai dengan ASTM,kami juga menyediakan berbagai brand/merk internasional dari USA,Eropa dan China,produk internasional yang kami supply/tawarkan seperti : Yasuda Seiki, Toyoseiki, Qualitest, Drick Instrument, Cell Instrument dan lain – lain.

Jual No.102 Geer Type Aging Oven di Balaraja

Kami juga menyediakan Jasa Perbaikan (SERVICE),Jasa Perawatan (Maintenace) dan support untuk KALIBRASI/AKSESSORIES SPAREPART jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda.

PT. Mora Anugerah Berkat (M.A.B)
Click Here : No.102 Geer Type Aging Oven Brochure
Click Here : Plastic, Rubber, Film and Polymer Testing Equipment
Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang – Provinsi Banten
Phone : 021 7345.7064 / 7366.0160
Mobile : 0812.8140.0749 / 0812.8770.5470
Chat : Whats App,Line,WeChat,Telegram
Website : www.moraanugerah.id – www.moraanugerah.com
Email : info@moraanugerah.com – info@moraanugerah.id -marketing_div@moraanugerah.com

Jual No.102 Geer Type Aging Oven di Balaraja

No.101-H TABER TYPE ABRASION TESTER

Standard Method : JIS A1453, (K5400), K5600-5-8/9, K5665, K6264-2, K6404-4, K6902, K7204, (L1018), L1085, L1096, ASTM D1044, TAPPI-T476, JAS (JASO-M403), ISO 4649,5470-1, 7784-1/2,

This tester is used to evaluate the abrading endurance of flat surface materials when they are abraded with an abrading wheel.

The operator is to place the abrading wheel to the rotating test specimen at a prescript load and abrade the test specimen.

After the test is finished, the operator is to measure the abraded mass, volume, thickness, and the optical difference of the test specimen.

This tester is widely used in testing plastic, rubber, decorative sheet, leather, paper, and paint surface.9352

Click Here : No.101-H Taber Type Abrasion Tester Brochure

Click Here : Plastic, Rubber, Film and Polymer Testing Equipment

Specification

Model

No.101-H TABER TYPE ABRASION TESTER

Turn Table

φ150 mm

Table Rotation Speed

60 ± 2 rpm, 70 ± 2 rpm, 72 ± 2 rpm

Weight Load

2.45 N(250 gf), 4.9 N(500 gf), 9.8 N (1,000 gf)

Counter

6 Digits Preset Counter

Suction Nozzle

Inner φ8 mm: 2 pcs

Option

Inlet Pressure Gauge,Safety Cover

Accessories

Abrasion Wheel : 1 set (2 sets for No.101-H-2), Thickness Guage : 2 pcs,

Weight(4.9N,9.8N) : 2 pcs each,

Suction Device (Vacuum Cleaner) : 1 set , Power Plug Adaptor : 1 pc

Power Source

1 Hanging (No.101-H-1) : AC 100 V, 1-Phase, 15 A, 50/60 Hz

2 Hangings (No.101-H-2) : AC 100 V, 1-Phase, 20 A, 50/60 Hz

*2 outlets required

Dimensions /

Weight (Approx.)

1 Hanging (No.101-H-1) : W350 × D350 × H450 mm/ 25 kg

2 Hangings (No.101-H-2) : W700 × D350 × H510 mm/ 45 kg

Jual No.102 Geer Type Aging Oven di Balaraja

No.101-K Sander (For Abrasion Wheel)

Tool

Diamond

Rotation Speed

1,300 rpm to 1,500 rpm (50 Hz)

1,550 rpm to 1,800 rpm (60 Hz)

Accessories

Power Plug Adaptor: 1 pc

Power Source

AC 100 V, 1-Phase, 3 A, 50/60 Hz

Dimensions / Weight (Approx.)

W210 × D330 × H380 mm/ 10 kg

Jual No.102 Geer Type Aging Oven di Balaraja

No.101-HS TABER TYPE ABRASION TESTER

Standard Method : JIS A1453, (K5400), K5600-5-8/9, K5665, K6264-2, K6404-4, K6902, K7204, (L1018), L1085, L1096, ASTM D1044, TAPPI-T476, JAS (JASO-M403), ISO 4649, 5470-1, 7784-1/2, 9352

This is a tester with Wind Meter attached to No.101-H TABER TYPE ABRASION TESTER.

It sucks the abraded scrap during the test.

Not only that, it measures the air flow while sucking so it enables to have more precise test result.

Click Here : No.101-HS Taber Type Abrasion Tester Brochure

Click Here : Plastic, Rubber, Film and Polymer Testing Equipment

Model

No.101-HS TABER TYPE ABRASION TESTER (WITH WIND METER)

Turn Table

φ150 mm

Table Rotation Speed

60 ± 2 rpm, 70 ± 2 rpm, 72 ± 2 rpm

Weight Load

2.45 N(250 gf), 4.9 N (500 gf), 9.8 N (1,000 gf)

Counter

6 Digits Preset Counter

Suction Nozzle

Inner φ8 mm: 2 pcs

Option

Safety Cover

Accessories

Abrasion Wheel : 1 set (2 sets for No.101-H-2), Thickness Guage : 2 pcs, Weight(4.9N,9.8N) : 2 pcs each, Suction Device (Vacuum Cleaner) : 1 set Power Plug Adaptor : 1 pc

Power Source

AC 100 V, 1-Phase, 15 A, 50/60 Hz

Dimensions / Weight (Approx.)

W400 × D400 × H385 mm/ 25 kg

Jual No.102 Geer Type Aging Oven di Balaraja

No.102 GEER TYPE AGING OVEN

Standard Method : JIS A5756, B7757, C3005, K6257, K6723, K7212, K7368, ASTM D573, D5374, D5423, E145, UL-746B, IEC-60216-4-1, ISO 188,4577

Abrasion Wheel : 1 set (2 sets for No.101-H-2), Thickness Guage : 2 pcs,
Weight(4.9N,9.8N) : 2 pcs each, Suction Device (Vacuum Cleaner) : 1 set
Power Plug Adaptor : 1 pc