Jual/Harga Taber Abrader Testing di East Jakarta Industrial Park

 

Jual/Harga Taber Abrader Testing di East Jakarta Industrial Park

 

A Taber Type Abrasion Tester, often simply referred to as a Taber Abraser or Taber Abrader, is a widely recognized and standardized instrument used to evaluate the abrasion resistance of a broad range of materials. It simulates real-world wear conditions to determine how well a material can withstand friction, rubbing, or scraping.

How it Works :

• The core principle of the Taber Abraser involves a unique “rub-wear” action:

• Sample Mounting : A flat, circular specimen (typically 100mm in diameter) of the material to be tested is securely mounted on a rotating turntable.

• Abrasive Wheels : Two genuine Taber abrasive wheels are lowered onto the specimen surface with a specified load (commonly 500g or 1000g, including the weight of the abrading arm). These wheels are designed to break down during use, exposing new abrasive particles.

• Rotation and Abrasion : As the turntable rotates, the abrasive wheels are driven by the sample in opposite directions. One wheel rubs the specimen outward towards the periphery, while the other rubs inward towards the center. This creates a characteristic crossed-arc abrasion pattern.

• Debris Removal : A vacuum system is typically integrated to continuously remove loose wear debris during the test, ensuring consistent abrasion.

• Evaluation: The test can be run for a fixed number of cycles or until a predefined end-point is reached (e.g., noticeable wear, coating failure, gloss reduction, or color fading). The abrasion resistance is then quantified by methods such as:

                     – Weight Loss: Measuring the difference in weight before and after the test.

                     – Cycles to a Specific End-Point: Recording the number of cycles required to achieve a certain level of wear.

                     – Visual Inspection: Comparing the abraded sample to a known standard using a visual grading scale or pass/fail criteria.

                     – Thickness Loss: Measuring the reduction in material thickness.

                     – Change in Gloss or Haze: For transparent or coated materials.

Jual/Harga Taber Abrader Testing di East Jakarta Industrial Park

Applications :

The Taber Type Abrasion Tester is a versatile tool used across numerous industries for quality control, research and development, and material evaluation. Its applications include:

Coatings and Paints : Evaluating the scratch, scuff, and wear resistance of floor coatings, automotive paints, industrial finishes, varnishes, and electroplated surfaces.

Plastics and Rubber : Determining the scratch and wear resistance of plastic films, rubber parts, packaging materials, tires, seals, and other plastic components (e.g., in consumer electronics, medical devices).

Textiles and Leather : Assessing the wear resistance of fabrics (upholstery, clothing, industrial textiles), carpets, and leather products (e.g., car seat fabrics, footwear, furniture fabrics).

Paper and Printing : Evaluating the wear resistance of printed materials like labels, wrapping paper, and book covers to prevent ink or coating degradation.

Electronic Equipment : Testing the scratch resistance of surfaces like mobile phone screens and keyboards.

Building Materials and Flooring: Evaluating the durability of tiles, wood floors, and other flooring materials, as well as concrete and asphalt.

Automotive Industry : Testing the durability of interior materials such as dashboards and seat covers.

General Materials: Metals, ceramics, laminates, safety glazing, and many other flat materials.

Jual/Harga Taber Abrader Testing di East Jakarta Industrial Park

Standards :

The Taber Abrasion Test is referenced in numerous international standards, ensuring consistent and comparable results. Some common standards include:

• ASTM D4060: Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser.

• ASTM D1044: Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion.

• ASTM D3884: Standard Test Method for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method).

• ISO 5470: Rubber- or plastics-coated fabrics – Determination of abrasion resistance.

• ISO 7784: Paints and varnishes – Determination of resistance to abrasion.

• DIN 53516: Determination of abrasion resistance of rubber and elastomers.

• Numerous other industry-specific and national standards (e.g., BS, MIL, SAE, Ford Laboratory Test Methods).

No.101-H TABER TYPE ABRASION TESTER

Standard Method : JIS A1453, (K5400) , K5600-5-8/9, K5665 , K6264-2, K6404-4, K6902, K7204, (L1018), L1085, L1096, ASTM D1044, TAPPI-T476, JAS, (JASO-M403), ISO 4649, 5470-1, 7784-1/2, 9352

This tester is used to evaluate the abrading endurance of flat surface materials when they are abraded with an abrading wheel.

The operator is to place the abrading wheel to the rotating test specimen at a prescript load and abrade the test specimen.

After the test is finished, the operator is to measure the abraded mass, volume, thickness, and the optical difference of the test specimen.

This tester is widely used in testing plastic, rubber, decorative sheet, leather, paper, and paint surface.

Click Here : Yasuda Seiki No.101-H Taber Type Abrasion Tester Brochure

TABER TYPE ABRASION TESTER
Model	No.101-H TABER TYPE ABRASION TESTER
Specification
Turn Table	φ150 mm
Table Rotation Speed	60 ± 2 rpm、70 ± 2 rpm、72 ± 2 rpm
Weight Load	2.45N (250 gf) / 4.9N (500 gf) / 9.8N (1,000 gf）
Counter	6 Digits Preset Counter
Suction Nozzle	Inner φ8 mm: 2 pcs
Option	Inlet Pressure Gauge,Safety Cover
Accessories	Abrasion Wheel: 1 set (2 sets for No.101-H-2), Thickness Guage: 2 pcs, Weight (4.9N, 9.8N) 2 pcs each, Suction Device (Vacuum Cleaner) : 1 1 set Power Plug Adaptor: 1 pc
Power Source	1 Hanging (No.101-H-1) : AC 100 V, 1-Phase, 15 A, 50/60 Hz 2 Hangings (No.101-H-2) : AC 100 V, 1-Phase, 15 A × 2, 50/60 Hz * 2 outlets required
Dimensions / Weight (Approx.)	1 Hanging (No.101-H-1) : W350 × D350 × H450 mm / 25 kg 2 Hangings (No.101-H-2) : W700 × D350 × H510 mm/ 45 kg
No.101-K WHEEL REFACER (FOR TABER ABRASION WHEELS)
Tool	Diamond
Rotation Speed	Approx. 1,400 rpm (50 Hz)     ;     Approx. 1,700 rpm (60 Hz)
Power Source	AC 100 V, 1-Phase, 3 A, 50/60 Hz
Dimensions / Weight (Approx.)	Approx. W210 × D350 × H390 mm/ 12 kg

==================================================

Jual/Harga Taber Abrader Testing di Kawasan Industri Bajatama

==================================================

This is a tester with Wind Meter attached to No.101-H TABER TYPE ABRASION TESTER.

It sucks the abraded scrap during the test.

Not only that, it measures the air flow while sucking so it enables to have more precise test result.

Click Here : Yasuda Seiki No.101-HS Taber Type Abrasion Tester Brochure

TABER TYPE ABRASION TESTER
Model	No.101-HS TABER TYPE ABRASION TESTER (WITH WIND METER)
	No.101-HS TABER TYPE ABRASION TESTER (WITH VACUUM FLOW METER)
Specification
Turn Table	φ150 mm
Table Rotation Speed	60 ± 2 rpm, 70 ± 2 rpm, 72 ± 2 rpm
Weight Load	2.45N (250 gf) / 4.9N (500 gf) / 9.8N (1,000 gf)
Counter	6 Digits Preset Counter
Suction Nozzle	Inner φ 8 mm : 2 pcs
Option	Safety Cover
Accessories	Abrasion Wheel : 1 set (2 sets for No.101-H-2), Thickness Guage : 2 pcs, Weight(4.9N,9.8N) : 2 pcs each, Suction Device (Vacuum Cleaner) : 1 set Power Plug Adaptor : 1 pc
Power Source	AC 100 V, 1-Phase, 15 A, 50/60 Hz
Dimensions / Weight (Approx.)	W400 × D400 × H385 mm/ 25 kg

Berikut ini adalah daftar alat uji (material testing equipment untuk berbagai pengujian material testing YASUDA SEIKI sebagai berikut :

Jual/Harga Taber Abrader Testing di East Jakarta Industrial Park

 

PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan laboratorium untuk industri dan manufactur seperti Jual/Harga Taber Abrader Testing di East Jakarta Industrial Park   , kami juga menyediakan berbagai brand/merk internasional dari USA, Eropa dan China,produk internasional yang kami supply/tawarkan seperti : Qualitest, Yasuda Seiki, Erichsen, Drick Instrument, Gester Instrument, SDL Atlas dan lain – lain ; Kami juga menyediakan Jasa Perbaikan (SERVICE), Jasa Perawatan (Maintenace) dan support untuk KALIBRASI / AKSESSORIES SPAREPART jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda.

PT. Mora Anugerah Berkat (M.A.B)

Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang – Provinsi Banten

Phone : 021 7345.7064

Mobile/HP : 0812.8140.0749 / 0812.8770.5470

Chat : Whats App,Line,WeChat,Telegram

Website : www.moraanugerah.id – www.moraanugerah.com

Email : info@moraanugerah.com – marketing@moraanugerah.com – marketing_div@moraanugerah.com