Item

Specifications

General

Parameters

Power Supply

AC220V, 50/60 Hz (Standard)

1320VA ; 110V 60Hz (Optional)

Size (L*W*H)

950*645*(1250-11450) mm

Maximum heater output power (220VAC)

Air chamber heater: 330W;

Water tank heater: 155W

Auxillary network power output

AC 220V / 50Hz, Both maximum permissible currents are 220V 1.5A

Heater indication

0-100%, 10% increasing amount

Temperature control mode

Bed temperature mode ; The skin temperature mode

Bed temperature control

25.0 – 37.0°C;

temperature range

37.1 – 39.0°C (Span Mode)

Skin temperature sensor temperature display range

5.0 – 65.0°C

Heating time

< 50min

Temperature variability

< 0.5°C

Temperature uniformity

(mattress in horizontal position)

< 0.8°C

Temperature uniformity

(mattress in tilted position)

< 1.0°C

Difference between average incubator temperature and control temperature

< 1.5°C

Skin temperature sensor accuracy

=+0.3°C’

Humidity
Control

The running time of the tank after it is filled with distilled water

Humidity below 70%RH, at least 24h

Water tank capacity

1500ml

Humidity display range

0%RH – 99%RH

Humidity control range

CAH%RH – 90%RH(1% per adjustment)

Humidity control accuracy

1

Oxygen
Concentration
Control

Oxygen concentration

display range

0% – 99%

Oxygen concentration display resolution

1%

Oxygen concentration control accuracy

=+5% oxygen volume concentration’

Oxygen concentration setting range

21% – 60% (1% per adjustment)

Oxygen sensor

service life

The maximum use time is 10000h at

100 % oxygen concentration

Transport
Storage

Temperature

-2°C – +55°C

Atmospheric pressure range

500hPa – 1060hPa

Relative humidity

< 93% RH

Packing Size /
Gross Weight

Base packing size: 1200*800*870mm 50kg

Body packing size: 1100*710*855mm 60kg

The
Work
Environment

Relative humidity

30%RH – 75%RH

The environment temperature

=+20°C – + 30°C’

Pressure range

700hPa – 1060hPa

Service altitude

< 2000m

Over voltage category

II

Pollution levels

2

Ambient air velocity

< 0.3m/s

Other
Indicator

Environmental noise in

incubator baby compartment

No more than 55dB(A) at stable temperature

Carbon dioxide concentration in the infant compartment

A mixture of 4% carbon dioxide and air was fed into an 8mm diameter tube in the vertical direction from the mat to the top of the box at 750mL/min to a point 10cm above the mattress center and 10cm above the center. The concentration was less than 0.5% after stabilization

The velocity of air flow over a baby’s mattress

< 0.35m/s

General

Alarm

Power off alarm, Fan alarm, sensor alarm, Deviation alarm, Over temperature alarm, Water tank placement error alarm, Water shortage alarm

The

System

Alarm

Mcu1 and Mcu2 communication error alarm, Mcu2 and Mcu3 communication error alarm, Analog-to-digital conversion chip 2544 fault alarm, Analog-to-digital conversion chip 2548 fault alarm, Over temperature alarm, Temperature heating system fault, Humidity heating system fault

Configuration :

Model

BK-3201 (I)

BK-3201 (II)

Temp.Control

Bed/Skin temperature

Bed/Skin temperature

Display

LCD

LCD

Bed Temp. Control Range

25°C – 39°C

25°C – 39°C

Skin Temp. Control Range

34°C – 38°C

/

Humidity Control Range

CAH% – 99%RH

CAH% – 99%RH

Oxygen Control Range

21% – 99%

/

Cabinet

Yes

Yes