NEEDED ACCESSORIES |
|
E046N |
NEEDLE, hardened Ø 1.13 mm EN 196-3 |
E046-01N |
NEEDLE, hardened Ø 1 mm ASTM – AASHTO |
E055-10 |
CONICAL PLASTIC MOULD Ø 70/80 h 40 mm (EN – NF) |
E055-05 |
CONICAL PLASTIC MOULD Ø 60/70 h 40 mm (ASTM – AASHTO) |
CONICAL MOULDS TO BS, DIN, UNI SPECIFICATIONS: |
|
E055-04 |
CONICAL PLASTIC MOULD Ø 80/90 h 40 mm (UNI) |
E055-13 |
CONICAL PLASTIC MOULD Ø 65/75 h 40 mm (DIN) |
E055-11 |
CONICAL BRASS MOULD Ø 80/90 h 40 mm (BS) |
ACCESSORIES |
|
E055-06 |
ADDITIONAL WEIGHT 700 g to the sliding probe (EN – NF) |
E042N |
FINAL NEEDLE Ø 1.13 mm (EN – NF – BS) |
E042-01N |
FINAL NEEDLE Ø 1 mm (Standards: ASTM – AASHTO) |
E055-08 |
GLASS THERMOMETER -10 to +50 °C. |
E044-40N |
CONICAL PENETRATION NEEDLEØ 8 mm by 50 mm long for gypsum tests. Standards: EN 13279-2 | DIN 1168 |
E055-15 |
PROBE,total weight of 100 g for tests on gypsum, EN 13279-2 | DIN 1168 |
SPARES |
|
E055-07 |
Glass base plate Ø 120 mm |
E044-48N |
Tang to fix the needle to the probe |
E042-02N |
Consistency plunger Ø 10×50 mm |