Harga Deflection Temperature Under Load (DTUL)

/ BLOG / By

Harga Deflection Temperature Under Load (DTUL) 

 

 

 

Harga Deflection Temperature Under Load (DTUL) 

 

PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak dalam bidang industrial testing khususnya untuk pengujian material pada industri / manufacture seperti pada industri bidang (plastic, rubber, tape dan polymer), industri bidang (tinta, pewarnaan, chemical),industri bidang (kertas/paper, pulp) dan industri bidang (garment, textile, yarn dll) dengan inovasi PT.Mora Anugerah Berkat ingin menjadi one stop solution atas kebutuhan industrial testing material yang di butuhkan bagi industri / manufactur yang ada di indonesia.

 

  • No.148-HD Heat Distortion Tester

  • Standard Method : JIS-K7191-1, K7206, ASTM-D648, D1525, IEC-335-1, ISO-75-1, 306

  • This tester is used to evaluate the heat resistance of plastic.

  • By loading specified bending stress to the test specimen while increasing the test temperature of the oil bath at a certain rate, the operator is to report the temperature at which the test specimen reaches standard deflection.

  • The tester can also conduct the VICAT softening temperature test and the ball pressure test.

 

No.148HD HEAT DISTORTION TESTER

SPECIFICATION

Stations

3, 4 or 6 Stations (3 kinds)

Temperature Range

Max. 300 °C (Oil Bath)

Heating Speed

120 ± 10°C/hr, 50 ± 5°C/hr,  VICAT : 120 ± 10℃/hr, 50 ± 5°C/hr

Bending Stress

(Method A) JIS･ISO : 1.80MPa ;
(Method B) 0.45MPa ;
(Method C) 8.00Mpa ;
ASTM : 1.82Mpa ; 0.455Mpa

Weight Load

DTUL: Choose 2 weights from initial load v76.5gf to max. 3,210gf
Options
VICAT: 10 ± 0.2N, 50 ± 1N BP: 19.6 ± 20N

Displacement
Measurement

Differential Transformer : Scale 1/1,000mm, Stroke 4mm

Pressure Foot

DTUL: R 3.0 ± 0.2 mm

Option VICAT: 1.000 ± 0.015 mm2

Option Ball Pressure: φ5 mm

Support Length

64 ± 1 mm, 100 ± 2 mm

RefrigeratingDevice

Water Circulating System Option Built-In Refrigerator
*For low test start temperature (e.g., 20 to 23°C)

Oil Circulation
Device

Propeller Type
For 3 and 4 Stations : 2 Propellers
For 6 Stations : 3 Propellers

Software

Windows 10 Compatible (Included)

Accessories

Pressure Foot Adjustment, Specimen Holder

Option

Silicon Oil, Safety Cover, Simultaneous Loading Device, Built-In Printer, Oil Level Sensor,Glass Sample for Calibration (Fused Quartz), Safety Door Lock, Signal Tower Light

Power Source

Without refrigerator
For 3 and 4 Stations : Single-Phase, AC200/220V 20A 50/60Hz
For 6 Stations : Single-Phase, AC200/220V 30A 50/60Hz

With refrigerator
For 3 and 4 Stations : Three-Phase, AC200/220V 20A 50/60Hz
For 6 Stations : Three-Phase, AC200/220V 30A 50/60Hz

Dimensions /
Weight (Approx.)

Floor Model W1,100 × D700 × H1,500mm / 180 to 300 kg
Tabletop Model W1,100 × D700 × H1,000mm / 155 to 185 kg

=====================================

  • No.148-HDA HEAT DISTORTION TESTER (FULL AUTOMATIC)

  • Standard Method : JIS-K7191-1,  K7206,  ASTM-D648,   D1525,   IEC-335-1,  ISO-75-1,  306

  • This tester is the fully automatic version of the HEAT DISTORTION TESTER. The robotic mechanism enables the operator to conduct the usual heat distortion test and VICAT softening temperature test automatically. By setting the test specimen to the specimen feeder, the computer software will continuously conduct heat resistance test for a maximum of 120 samples.

 

No.148-HDA HEAT DISTORTION TESTER (FULLY AUTOMATIC)

Specification

Stations

3 or 6 Stations (2 kinds)

Temperature Range

Max. 300 °C (Oil Bath)

Heat-Up Speed

120 ± 10 °C/hr and 50 ± 5 °C/hr

Bending Stress

1.80 MPa, 0.45 MPa

Weight Load

DTUL: Choose 2 types from Initial 76.5 gf to Max. 3,210 gf
Option VICAT: 10 ± 0.2 N, 50 ± 1 N
Option Ball Pressure: 0.4 to 2.0 N

Displacement
Measurement

Differential Transformer : Scale 1/1,000 mm, Stroke 0 to ± 2 mm

Pressure

Foot

DTUL: R 3.0 ± 0.2 mm
Option VICAT: 1.000 ± 0.015 mm2
Option Ball Pressure: φ5 mm

Support Length

64 ± 1 mm, 100 ± 2 mm (Standard)

Refrigerating
Device

Water Circulating System (Option: Self Contained Refrigerator) :
*When High Temperature cooling or Test Start Temperature 20 to 23 °C

Churning
Device

Propeller Type 3 and 4 Stations : 2 Propellers
6 Stations: 3 Propellers

Test
Specimens

40 pcs × 3 Cassettes (Total 120 pcs)

*When T10 mm

Software

Windows Compatible

Accessories

Pressure Foot Adjustment, Specimen Holder

Option

Silicon Oil, Safety Cover, Simultaneous Loading Device
(Standard for No.148-HDA), Borosilicate Glass

Power Source

AC 200 V, 3-Phase, 30 A, 50/60 Hz

Air Source

0.5MPa or More

Dimensions / Weight

(Approx.)

W930 to 1,150 × D600 × H1,300 mm, 350 to 400 kg

=====================================

  • No.148-HD500 HIGH TEMPERATURE HEAT DISTORTION TESTER

  • Standard Method : JIS-K7191-1,  K7206,  ASTM-D648,   D1525,   IEC-335-1,  ISO-75-1,  306

  • This tester adapts the air circulating heating system to test the heat resistance of plastic (usually super engineering plastic) up to 500 °C. The specimen racks are made by glass quartz to prevent measuring disturbances due to the deflections of the racks itself.

 

No.148-HD500 HIGH TEMPERATURE HEAT DISTORTION TESTER

Specification

Stations

3 Stations

Temperature Range

Max. 500 °C (Air Chamber, Nitrogen Gas Filling Device Attached)

Heat-Up Speed

120 ± 10 °C/hr, 50 ± 5 °C/hr

Bending Stress

1.80 MPa, 0.45 MPa

Weight Load

DTUL: Choose 2 types from Initial 76.5 gf to Max. 3,210 gf
Option VICAT: 10 ± 0.2 N, 50 ± 1 N
Option Ball Pressure: 0.4 to 2.0 N

Displacement
Measurement

Differential Transformer : Scale 1/1,000 mm, Stroke 0 to ± 2 mm

Pressure
Foot

DTUL: R 3.0 ± 0.2 mm
Option VICAT: 1.000 ± 0.015 mm2
Option Ball Pressure: φ5 mm

Support Length

64 ± 1 mm, 100 ± 2 mm (Standard)

Refrigerating

Fan type (Air Fan Cooling), 3 Fans,

Device

Carbon Gas Injection Cooling System

Churning Device

Propeller type, 3 propellers

Software

Windows Compatible

Accessories

Pressure Foot Adjustment, Specimen Holder

Option

Safety Cover, Simultaneous Loading Device,

Borosilicate Glass

Power Source

AC 200 V, 1-Phase, 30 A, 50/60 Hz

Dimensions / Weight
(Approx.)

W1,100 × D650 × H1,500 mm, 250 kg

 

Berikut ini catalog produk untuk pengujian di berbagai material pada industri / manufaktur sebagai berikut :

 

PT. Mora Anugerah Berkat (M. A. B) adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan industrial material testing equipment seperti Harga Deflection Temperature Under Load (DTUL) , kami juga menyediakan peralatan yang sudah teruji dan sesuai dengan standard seperti ASTM, JIS dan lain-lain ; kami juga menyediakan berbagai brand / merk internasional dari USA, Eropa dan China,produk internasional yang kami supply / tawarkan seperti : Yasuda Seiki, Qualitest, Toyoseiki, Drick Instrument, Cometech,Testex Instrument dan lain – lain.

Harga Deflection Temperature Under Load (DTUL) 

  • PT. Mora Anugerah Berkat (M.A.B)

  • Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan, Kota Tangerang – Provinsi Banten

  • Phone : 021 7345.7064 / 7366.0160

  • Mobile : 0812.8140.0749 / 0812.8770.5470

  • Chat : Whats App, Line, WeChat, Telegram

  • Website : www.moraanugerah.id – www.moraanugerah.com

  • Email : info@moraanugerah.com – info@moraanugerah.id – marketing_div@moraanugerah.com