Shore A – B – C – D – D0 – 0 – 00 – E – M – 000 – 000S
Digital portable hardness tester in compliance with ASTM 2240, ISO R.868, DIN 53505, JIS K7215 standards. Slim measuring nose to ensure exact measurement also on small components. Suitable for tires, O-rings, roll, for soft flexible rubber, plastic, PVC, polyester, neoprene, leather, thiokol, nitril rubbers, etc.
Operating console with LCD screen. Measure at peak / at time / Continuous, store and number of tests, automatic average, list of stored result, statistic, standard deviation, histogram. Data output for computer or printer connection RS 232 C or USB
The probe can be installed on the bench support, manual or motorized, for laboratory purpose.
ELECTRONIC SHORE – Portable Hardness Tester for Rubber,Plastic,Medical Components,Paper and Sponge
DISPLAY
Display and intuitive keyboard with IP 64 protection. Set of the hardness test method. Measurement settings. Storable and printable statistics. Results, averages and conversions
BENCH SUPPORT
Bench stand support for extremely precise hardness testing on small samples and thin zones. The force is applied perpendicularly to the sample surface with high stability whitin any dwell time.
O-Rings ASTM 1414
Set of clamping holders for very precise hardness testing on O-Rings in compliance with ASTM 1414. Sections Ø 1 – 1.79 – 2.62 – 3.53 – 5.33 – 6.99 mm, other on request.
ELECTRONIC SHORE – Portable Hardness Tester for Rubber,Plastic,Medical Components,Paper and Sponge
SHORE (ISO 7619 / ASTM E2240) |
|||
Shore A |
ASTM E2240 /
|
Frustum 35° |
Soft surfaces, flexible rubber, natural rubber, plastic, PVC, polyester, neoprene, leather, nitrile rubbers, tyres, etc |
Shore D |
ASTM E2240 /
|
Cone 30° |
Hard and rigid surfaces, ceramic and composites, acrylics, plexiglass, print rolls, cellulose, acetates,nylon, etc |
Shore B |
ASTM E2240 |
Cone 30° |
Medium values. As A scale for higher values. |
Shore C |
ASTM E2240 |
Frustum 35° |
Medium-hard values. As D scale for lower values. |
Shore DO |
ASTM E2240 |
Ball 1.2 mm |
From medium-hard to hard values. As B and C. |
Shore O |
ASTM E2240 |
Ball 1.2 mm |
Low values and very flexible materials. As A scale for low values. |
Shore OO |
ASTM E2240 |
Ball 1.2 mm |
Very soft rubbers, sponges, expanded rubber, foam rubber, natural rubber and silicon |
Shore E |
ASTM E2240 |
Ball 2.5 mm |
Very soft rubbers, natural rubber, elastomers, casting resin, soft PVC, leather, etc. |
Shore M |
ASTM E2240 |
Cone 30° |
As A scale, for thin specimens and elastomer materials. |
Shore 000 |
ASTM E2240 |
Ball 6.35 mm |
Ultra-soft rubbers, sponges, expanded rubber, foam rubber, natural rubber and silicon. |
Shore 000-S |
ASTM E2240 |
Ball 10.7 mm |
Ultra-soft rubbers, viscoelastic polymers. |