CLASH-BERG TORSION FLEXIBILITY TESTER
PT.Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak di bidang alat laboratorium dan testing material, kami sudah mensupply berbagai alat keseluruh indonesia,khusus untuk material testing kami ingin menawarkan produk dari YASUDA SEIKI yang merupakan salah satu brand Jepang yang banyak di gunakan untuk pengujian material seperti : No.170 Clash-Berg Torsion Flexibility Testing
Berikut adalah Material Testing Equipment yang kami miliki berikut adalah link / tautan produk sebagai berikut :
CLICK HERE : YASUDA SEIKI – Plastic & Rubber Testing Catalog
CLICK HERE : YASUDA SEIKI – Electric Wire & Cable Testing Catalog
CLICK HERE : YASUDA SEIKI – Pulp & Paper Testing Catalog
CLICK HERE : YASUDA SEIKI – Leather, Vinyl Leather Testing Catalog
CLICK HERE : DRICK INST – Packaging Testing Catalog
CLICK HERE : CELL INST – Plastic,Rubber,Tape/Film & Polymer Catalog
CLICK HERE : TESTEX INST – Fabric, Yarn & Textile/Garment Testing Catalog
-
No.170 CLASH-BERG TORSION FLEXIBILITY TESTER (MANUAL)
-
Standard Method : JIS (K6734), (K6745), K6924-2, ASTM D1043, ISO 458
-
This tester is used to measure the softening temperature of plastic.
-
The test specimen is to be attached to the upper and lower Chucks of the tester and then dipped into water which the temperature is raised at a constant speed.
-
At every 5 °C the water temperature has rises, the operator is to leave the test specimen untouched for 3 minutes.
-
After the 3 minutes have passed, twisting torque is to be added to the test specimen so that the rigidity coefficient can be calculated from the twisting angle.
-
The softening temperature will be acquired from the temperature-rigidity coefficient curving line.
-
Click Here : No.170 Clash-Berg Torsion Flexibility Tester (Manual) Brochure
-
Click Here : Plastic, Film, Rubber dan Polymer Testing Equipment Catalog
=========================================================================
CLASH-BERG TORSION FLEXIBILITY TESTER
=========================================================================
-
No.170-AUTO CLASH-BERG TORSION FLEXIBILITY TESTER (AUTOMATIC)
-
Standard Method : JIS (K6734), (K6745), K6924-2, ASTM D1043, ISO 458
-
This tester reads the twisting angle of the test specimen by encoder to calculate the rigidity coefficient.
-
The temperature-rigidity coefficient curving line will be displayed on the PC to acquire the softening temperature.
-
Click Here : No.170 Clash-Berg Torsion Flexibility Tester (Automatic)
-
Click Here : Plastic, Film, Rubber dan Polymer Testing Equipment Catalog
Model |
No.170 CLASH-BERG TORSIONFLEXIBILITY TESTER (MANUAL) |
Model |
No.170-AUTO CLASH-BERG TORSIONFLEXIBILITY TESTER (AUTOMATIC) |
Specime |
W6.35 ± 0.03 mm, L64 mm, T0.8 to 1.5 mm |
Specime |
W6.35 ± 0.03 mm, L64 mm, T0.8 to 1.5 mm |
Chuck Distance |
40 mm |
Chuck Distance |
40 mm |
Angle Scale |
0 to 360° (Scale 1°) *Max. Angle 270° |
Angle Scale |
0 to 270° (Scale 1°) Detection: Rotary Encoder |
Temperature Range |
-60 to 100 °C (Dry Ice Cooling) |
Temperature Range |
-60 to 100 °C (Dry Ice Cooling) |
Heat-Up Speed |
2 °C/min |
Heat-Up Speed |
2 °C/min |
Torque Device |
Pulley Type |
Torque Device |
Pulley Type |
Weight |
5 g, 10 g, 20 g, 50 g |
Weight |
5 g, 10 g, 20 g, 50 g |
Software |
― |
Software |
Windows Compatible |
Accessories |
Duwar Flask, Thermometer : 2 pcs,Specimen Cutter,Notching Tool,Specimen Setting Gauge |
Accessories |
Duwar Flask, Thermometer : 2 pcs,Specimen Cutter,Notching Tool,Specimen Setting Gauge |
Power Source |
AC 100 V, 1-Phase, 10 A, 50/60 Hz |
Power Source |
AC 100 V, 1-Phase, 10 A, 50/60 Hz |
Dimensions /Weight (Approx.) |
W300 × D400 × H900 mm, 36 kg |
Dimensions /Weight (Approx.) |
Tester Body: W320 × D400 × H1,230 mm, 50 kgControl Box: W350 × D460 × H355 mm, 17 kg |
Berikut ini adalah daftar alat uji (testing equipment) untuk berbagai pengujian material testing YASUDA SEIKI sebagai berikut :
Click Here : Plastic, Rubber, Tape Film and Polymer Testing Equipment
| YASUDA SEIKI | ||
| Material : Plastic, Rubber, Tape Film and Polymer | ||
| Page | Nama Alat Testing | Code No |
| 1 | TABER TYPE ABRASION TESTER | 101 |
| GEER TYPE AGING OVEN | 102 | |
| 2 | WILLIAM TYPE PLASTOMETER | 105 |
| AUTOMATIC WILLIAM TYPE PLASTOMETER | 105 AUTO | |
| SCHOPPER TYPE SAMPLE CUTTER | 115 | |
| 3 | OLSEN TYPE STIFFNESS TESTER FOR HEAVY LOAD | 118 |
| DIGITAL OLSEN TYPE STIFFNESS TESTER FOR HEAVY LOAD | 118 D | |
| DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER | 119 | |
| DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER WITH LOW TEMP. OVEN | 119 L | |
| 4 | DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER WITH LOW TEMP. OVEN (WITH A PICTURE BREAK DETECTION FUNCTION) |
119- LVR |
| 5 | MELT FLOW INDEX TESTER | 120-FWP |
| FULLY AUTOMATIC MELT FLOW INDEX TESTER | 120 LABOT-MI | |
| AUTOMATIC MELT FLOW INDEX TESTER | 120 SAS-2000 | |
| 6 | BRITTLENESS TEMPERATURE TESTER | 121 |
| R BRITTLENESS TEMPERATURE TESTER（WITH REFRIGERATING MACHINE） | 121 | |
| RA BRITTLENESS TEMPERATURE TESTER (ROTARY HOLDER TYPE) | 121 | |
| 7 | FULLY AUTOMATIC BRITTLENESS TEMPERATURE TESTER | 121 AUTO |
| TEST TUBE AGING TESTER | 122 | |
| SCHOPPER TYPE THICKNESS GAUGE | 128/129 | |
| 8 | AUTOMATIC CAPILLARY RHEOMETER FOR LIGHT LOAD | 140-SAS-2002 |
| AUTOMATIC CAPILLARY RHEOMETER FOR HEAVY LOAD | 140-SAS-2005 | |
| 9 | CREEP TESTER FOR LIGHT LOAD | 145-A |
| CREEP TESTER FOR HEAVY LOAD | 145-B | |
| MIXED CREEP TESTER（STRESS RELAXATION TESTER） | 145-C | |
| 10 | RETENTIVITY TESTER | 145-D |
| TR TESTER | 145-L | |
| SERVOMOTOR TYPE CREEP TESTER | 145-SVS | |
| 11 | GEHMAN STIFFNESS TESTER | 145-G |
| FULLY AUTOMATIC HEAT DISTORTION TESTER | 148-HDA | |
| HEAT DISTORTION TESTER | 148-HD-PC | |
| 12 | HIGH TEMPERATURE HEAT DISTORTION TESTER | 148-HD-500 |
| STRESS-CRACKING TESTER | 149 | |
| LAMBOURN ABRASION TESTER | 150 | |
| 13 | DIN ABRASION TESTER | 151 |
| DIN ABRASION TESTER WITH OVEN | 151-OV | |
| 14 | GEL TIME TESTER | 153 |
| GEL TIME TESTER（CONTINUOUS RECORD TYPE） | 153 | |
| 15 | MARON MECHANICAL STABILITY TESTER | 156 |
| AUTOMATIC MARON MECHANICAL STABILITY TESTER | 156-AUTO | |
| FLOOR MATERIAL FATIGUE AND ABRASION TESTER BY CASTER | 159 | |
| 16 | SLIP TESTER | 162 |
| SLIP TESTER(HORIZONTAL METHOD) | 162-FS | |
| 5 HANGINGS SLIP TESTER | 162-S5 | |
| 17 | O-Y PULL SLIP TESTER | 162-OY |
| CLASH-BERG TORSION FLEXIBILITY TESTER | 170 | |
| AUTOMATIC CLASH-BERG TORSION FLEXIBILITY TESTER | 170-AUTO | |
| COMPRESSION SET TESTER | 171 | |
| 18 | FILM IMPACT TESTER | 181 |
| FILM IMPACT TESTER WITH LOW TEMP. OVEN | 181-L | |
| FALLING BALL IMPACT TESTER | 183 | |
| 19 | BALL TACK TESTER | 183-BT |
| FALLING DART IMPACT TESTER | 183-S | |
| MCBURNEY INDENTATION TESTER | 184-A | |
| RESIDUAL INDENTATION TESTER | 184-B | |
| 20 | OZONE AGING TESTER | 187 |
| PLASTIC SAMPLE CUTTING MACHINE | 189-PAL | |
| AUTOMATIC SAMPLE FORMING MACHINE | 189-PFA | |
| 21 | NOTCHING MACHINE | 189-PN |
| AUTOMATIC NOTCHING MACHINE | 189-PNA/PNCA | |
| TEST MIXING ROLL | 191-TM/WM | |
| 22 | ELECTRIC HEATING SYSTEM TEST PRESS | 196 |
| LUPKE TYPE REBOUND RESILIENCE TESTER | 200 | |
| 23 | YSS HEAT SEALER | 212 |
| JIS HEAT SEALER | 213 | |
| OXYGEN INDEX FLAMMABILITY TESTER | 214 | |
| 24 | ELECTRIC HEATING SYSTEM MINI TEST PRESS | 219 |
| DART IMPACT TESTER | 220 | |
| PLASTIC FLAMMABILITY TESTER | 252-UL-94 | |
| 25 | UNIVERSAL IMPACT TESTER | 258 |
| DIGITAL IMPACT TESTER | 258-D | |
| IMPACT TESTER WITH LOW TEMP. OVEN | 258-L | |
| 26 | FULLY AUTOMATIC IMPACT TESTER | 258-ZA |
| FOAM RUBBER REPEATED COMPRESSION TESTER | 260 | |
| 27 | ROSS FLEXING TESTER | 270 |
| ROSS FLEXING TESTER WITH LOW TEMP. OVEN | 270-LFR | |
| 28 | HEAT SEAL TESTER | 276 |
| PLASTIC SLIDING ABRASION TESTER | 283 | |
| WILLIAM TYPE ABRASION TESTER | 275 | |
| 59 | DU PONT TYPE FALLING IMPACT TESTER | 517 |
| DU PONT TYPE FALLING IMPACT TESTER WITH LOW TEMP. OVEN | 517-L | |
| 66 | ELECTRIC SYSTEM PENCIL SCRATCH HARDNESS TESTER | 553-M |
| PENCIL SCRATCH HARDNESS TESTER | 553 | |
| 67 | FULLY AUTOMATIC PENCIL SCRATCH HARDNESS TESTER | 553-AUTO |
| PENCIL SCRATCH HARDNESS TESTER (LOADCELL TYPE) | 553-F | |
======================================================================================================
Click Here : Electric Wire Cord Testing Equipment
| YASUDA SEIKI | ||
| Material : Electric Wire Cord Testing Machine | ||
| Page | Nama Alat Testing | Code No |
| 1 | GEER TYPE AGING OVEN | 102 |
| 6 | BRITTLENESS TEMPERATURE TESTER | 121 |
| BRITTLENESS TEMPERATURE TESTER（WITH REFRIGERATING MACHINE） | 121-R | |
| BRITTLENESS TEMPERATURE TESTER（ROTARY HOLDER TYPE） | 121-RA | |
| 7 | AUTO FULLY AUTOMATIC BRITTLENESS TEMPERATURE TESTER | 121 AUTO |
| 29 | CABTYRE CABLE IMPACT TESTER | 124 |
| CABTYRE CABLE FLEXING TESTER | 125 | |
| CABTYRE CABLE ABRASION TESTER | 127 | |
| 30 | SPRING ELONGATION TESTER | 161 |
| ENAMELED WIRE STIFFNESS TESTER | 163 | |
| ENAMELED WIRE SOFTENING POINT TESTER | 173 | |
| 31 | VOLT-ENDURANCE AND DESTRUCTION TESTER | 175 |
| PARALLEL PLATE PLASTOMETER | 185 | |
| AUTOMATIC PARALLEL PLATE PLASTOMETER | 185-AUTO | |
| 32 | VOLT-ENDURANCE AND DESTRUCTION TESTER (TWISTPAIR METHOD) | 204 |
| LOW-VOLTAGE CABLE ABRASION TESTER FOR AUTOMOBILE | 208 | |
| 33 | MAGNET WIRE ABRASION TESTER(RECIPROCATING TYPE | 210 |
| SCRAPE TESTER（ONE DIRECTION TYPE） | 215 | |
| 34 | ELECTRIC WIRE FLAMMABILITY TESTER | 252-UL-1581 |
| ELECTRIC RECIPROCATING ABRASION TESTER (PLUG PIN | 253 | |
| PLUG FLEXING TESTER | 254 | |
| 35 | COMPOUND GRINDER | 255 |
| OUTLET PLUG DURABILITY TESTER | 256 | |
| CABLE BENDING TESTER | 262 | |
| 66 | ELECTRIC SYSTEM PENCIL SCRATCH HARDNESS TESTER | 553-M |
| PENCIL SCRATCH HARDNESS TESTER | 553 | |
| 67 | FULLY AUTOMATIC PENCIL SCRATCH HARDNESS TESTER | 553-AUTO |
| PENCIL SCRATCH HARDNESS TESTER (LOADCELL TYPE) | 553-F | |
======================================================================================================
Click Here : Pulp and Paper Testing Equipment
| YASUDA SEIKI | ||
| Material : Pulp and Paper Testing Machine | ||
| Page | Nama Alat Testing | Code No |
| 1 | TABER TYPE ABRASION TESTER | 101 |
| 7 | SCHOPPER TYPE THICKNESS GAUGE | 128/129 |
| 16 | SLIP TESTER | 162 |
| 16 | SLIP TESTER(HORIZONTAL METHOD) | 162-FS |
| 16 | 5 HANGINGS SLIP TESTER | 162-S5 |
| 18 | FILM IMPACT TESTER | 181 |
| 18 | FILM IMPACT TESTER WITH LOW TEMP. OVEN | 181-L |
| 39 | HANDLE-O-METER | 226 |
| 39 | MULLEN HIGH-PRESSURE TYPE BURSTING STRENGTH TESTER | 304-YPH |
| 39 | MULLEN LOW-PRESSURE TYPE BURSTING STRENGTH TESTER | 305-YPL |
| 40 | FPC FLEXING TESTER | 306 |
| FPC FLEXING TESTER WITH LOW TEMP. OVEN | 306-L | |
| 41 | MIT TYPE FOLDING ENDURANCE TESTER | 307 |
| MIT TYPE FOLDING ENDURANCE TESTER LOW TEMP. OVEN | 307-L | |
| SCHOPPER TYPE FOLDING ENDURANCE TESTER | 308 | |
| 42 | FENCHEL EXPANSION AND CONTRACTION TESTER | 309 |
| KLEMM CAPILLARY RISE TESTER | 310 | |
| GURLEY TYPE STIFFNESS TESTER | 311 | |
| 43 | TABER TYPE STIFFNESS TESTER | 312 |
| 43 | DIGITAL TABER TYPE STIFFNESS TESTER | 312-D |
| 43 | ELMENDORF TYPE TEARING RESISTANCE TESTER | 315 |
| 43 | DIGITAL ELMENDORF TYPE TEARING RESISTANCE TESTER | 315-D |
| 44 | RING CRUSH TESTER | 316 |
| 44 | WATER VAPOUR PERMEABILITY CUP | 318 |
| 44 | AUTOMATIC BEKK SMOOTHNESS TESTER | 321 |
| 45 | GURLEY TYPE DENSOMETER | 323 |
| AUTOMATIC GURLEY TYPE DENSOMETER | 323-AUTO | |
| CANADIAN STANDARD FREENESS TESTER | 324 | |
| 46 | SCHOPPER-RIEGLER TYPE FREENESS TESTER | 325 |
| PULP SCREENING TESTER | 330 | |
| AUTOMATIC K.B.B. SIZEING TESTER | 338 | |
| 47 | CLARK TYPE STIFFNESS TESTER | 342 |
| TAPE ADHESION ROLLER | 349 | |
| GURLEY TYPE WATER ABSORPTIVENESS TESTER (COBB METHOD) | 352 | |
| 48 | STANDARD SAMPLE CUTTER | 353 |
| DOUBLE BLADE SAMPLE CUTTER FOR RING CRUSH TESTER | 355 | |
| CURL-SIZE TESTER | 360 | |
| 49 | WATER VAPOUR PERMEABILITY CHAMBER | 367 |
| INTERNAL BOND TESTER | 368 | |
| CONTAINER COMPRESSION TESTER | 371-S | |
| 52 | COLOUR FASTNESS RUBBING TESTER | 428 |
======================================================================================================
Click Here : Paint, Pigment, Ink, Color Testing Equipment
| YASUDA SEIKI | ||
| Material : Paint , Pigment , Ink , Color Testing Machine | ||
| Page | Nama Alat Testing | Code No |
| 1 | TABER TYPE ABRASION TESTER | 101 |
| 18 | FALLING BALL IMPACT TESTER | 183 |
| 44 | WATER VAPOUR PERMEABILITY CUP | 318 |
| 49 | WATER VAPOUR PERMEABILITY CHAMBER | 367 |
| 51 | CROCK METER | 416 |
| 52 | COLOUR FASTNESS RUBBING TESTER | 428 |
| 56 | FLOW CUP | 505 |
| SPREAD METER | 506 | |
| AUTOMATIC SPREAD METER | 506-PCM | |
| 57 | WET FILM THICKNESS GAUGE | 507 |
| BAKER TYPE FILM APPLICATOR | 510 | |
| PAINT FILM BENDING TESTER | 514 | |
| 58 | ERICHSEN CUPPING TESTER | 516 |
| ELECTRIC SYSTEM ERICHSEN CUPPING TESTER | 516-M | |
| 59 | DU PONT TYPE FALLING IMPACT TESTER | 517 |
| DU PONT TYPE FALLING IMPACT TESTER WITH LOW TEMP. OVEN | 517-L | |
| MERCURY LAMP FADE METER | 518 | |
| 60 | DRAWING TESTER ON PAINT FILM | 519 |
| ZAHN VISCOSITY CUP | 522 | |
| PRINT INK DRYING TESTER | 524 | |
| 61 | GRIND METER | 527/547 |
| SUTHERLAND TYPE RUB TESTER | 528 | |
| DENSITY CUP | 536 | |
| 62 | GARDNER TYPE FALLING SAND ABRASION TESTER | 541 |
| AUTOMATIC FILM APPLICATOR | 542-AB | |
| AUTOMATIC FILM APPLICATOR (HEATING PLATE TYPE) | 542-AB-H | |
| 63 | AUTOMATIC FILM APPLICATOR (CERAMIC PLATE TYPE) | 542-CR |
| AUTOMATIC HOOVER MULLER | 546 | |
| 64 | SAG TESTER | 548-CKG |
| FILM APPLICATOR (DOCTOR BLADE) | 548-YKG | |
| NO PICK UP TIME TESTER FOR TRAFFIC PAINT | 549 | |
| 65 | CROSS CUT EXFOLIATION TESTER | 551 |
| AUTOMATIC CROSS CUT EXFOLIASION TESTER | 551-AUTO | |
| GARDNER TYPE WASHABILITY TESTER | 552 | |
| 66 | PENCIL SCRATCH HARDNESS TESTER | 553 |
| ELECTRIC SYSTEM PENCIL SCRATCH HARDNESS TESTER | 553-M | |
| HAND PUSH PENCIL SCRATCH HARDNESS TESTER | 553-S | |
| 67 | PENCIL SCRATCH HARDNESS TESTER (LOADCELL TESTER) | 553-F |
| FULLY AUTOMATIC PENCIL SCRATCH HARDNESS TESTER | 553-AUTO | |
| VOLUME DENSITY METER | 558 | |
| 68 | RCI TYPE DRYING TIME RECORDER | 567 |
| BARCOATER | 579 | |
====================================================================================================
Click Here : Yarn , Dyeing , Textile and Garment Testing
| YASUDA SEIKI | ||
| Material : Yarn , Dyeing , Textile and Garment Testing Machine | ||
| Page | Nama Alat Testing | Code No |
| 1 | TABER TYPE ABRASION TESTER | 101 |
| 7 | SCHOPPER TYPE SAMPLE CUTTER | 128/129 |
| 36 | WATER PROOF TESTER | 169 |
| 39 | HANDLE-O-METER | 226 |
| 42 | KLEMM CAPILLARY RISE ESTER | 310 |
| 42 | GURLEY TYPE STIFNESS TESTER | 311 |
| 45 | GURLEY TYPE DENSOMETER | 323 |
| AUTOMATIC GURLEY TYPE DENSOMETER | 323-AUTO | |
| 47 | CLARK TYPE STIFNESS TESTER | 342 |
| 49 | WATER VAPOUR PERMEABILITY CHAMBER | 367 |
| 50 | WATER VAPOUR PERMEABILITY CUP FOR TEXTILE | 401 |
| SPRAY TESTER | 402 | |
| MULLEN TYPE BURSTING STRENGTH TESTER FOR TEXTILE | 404 | |
| 51 | WATER PENETRATION RESISTENCE TESTER FOR TEXTILE | 409 |
| CROCK METER | 416 | |
| 52 | COLOUR FASTNESS RUBBING TESTER | 428 |
| OLSEN TYPE STIFFNESS TESTER FOR LIGHT LOAD | 429 | |
| SCOTT TYPE CREASE FLEX ABRASION TESTER | 433 | |
| 53 | FLAMMABILITY TESTER FOR TEXTILE | 440 |
| VERTICAL FLAMMABILITY TESTER FOR TEXTILE | 440-B | |
| MVSS FLAMMABILITY TESTER | 440-S | |
| 54 | ELMENDORF TYPE TEARING RESISTANCE TESTER FOR TEXTILE | 445 |
| ICI TYPE PILLING TESTER | 453 | |
| 45°FLAMMABILITY TESTER FOR TEXTILE | 455 | |
| 55 | ICI TYPE MACE SNAG TESTER | 473 |
| CANTILEVER TYPE STIFFNESS TESTER | 476 | |
====================================================================================================
PT.Mora Anugerah Berkat adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan alat pengujian khususnya untuk industri seperti Paint Testing,Ink Testing,Film Testing dan Coating Testing, salah satu pengujian diantaranya adalah diantaranya adalah CLASH-BERG TORSION FLEXIBILITY TESTER, kami juga menyediakan peralatan yang terbaik,sudah teruji dan sesuai dengan standard ASTM/JIS dll,kami juga menyediakan berbagai brand/merk internasional dari USA,Eropa dan China seperti Yasuda BYK Instruments,Elecometer,Yasuda Seiki,Toyoseiki dan masih banyak lagi, untuk informasi dan pemesanan silahkan kunjungi website kami atau hubungi kami.
CLASH-BERG TORSION FLEXIBILITY TESTER
Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di :
-
PT. Mora Anugerah Berkat (M.A.B)
-
Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan, Kota Tangerang – Provinsi Banten
-
Phone : 021 7345.7064
-
Mobile : 0812.8140.0749 / 0812.8770.5470
-
Chat : Whats App,Line,WeChat,Telegram
-
Website : www.moraanugerah.id – www.moraanugerah.com
-
Email : info@moraanugerah.com – info@moraanugerah.id – marketing_div@moraanugerah.com