BUHLER – Gas Cooler Series RC 1.1

 

BUHLER – Gas Cooler Series RC 1.1

 

Compact design: Pre-installed and ready to connect
Choose from one or two gas paths
Heat exchanger made from stainless steel, Duran glass and PVDF
Adjustable outlet dew point and alarm thresholds
Cooling block temperature display
Status display and output
Rated cooling power 360 kJ/h
Constant dew point stability ± 0.1 °C
Optional 4 – 20 mA or Modbus RTU signal output
Moisture detector, filter and condensate pump optional
Successor to the EGK 1/2 and EGK 1SD
Click Here : Sample Gas Cooler RC 1.1 Brochure
Click Here : Gas Cooler Series TC-MIDI Brochure

BUHLER – Gas Cooler Series RC 1.1

 

Gas Cooler Technical Data	​GAS COOLER SERIES RC 1.1
Ready for Operation	after max. 15 minutes
Rated Cooling Capacity (at 25°C)	360 kJ/h
Ambient Temperature	5 °C to 50 °C
Gas Outlet Dew Temperature,Preset	approx. 5 °C
Dew Point Fluctuations Static:	± 0.1 K
In the Entire Specification Range:	± 1.5 K
IP rating	IP 20
Housing	Stainless steel
Packaging Dimensions	Approx. 420 x 440 x 350 mm
Weight Incl. Heat Exchanger	approx. 15 kg
Electric Supply	115 V, 60 Hz or 230 V, 50/60 Hz ± 5% Plug per DIN EN 175301-803
Electrical Data	230 V 115 V
Typical Power Input :	296 VA 302 VA
Max. Operating Current :	2 A 3.5 A
Alarm Output Switching Connection	max. 250 V, 2 A, 50 VA Connector per DIN EN 175301-803
Installation	stand-alone or wall-mounted
Technical Data Peristaltic Pumps CPsingle / CPdouble
Flow Rate	0.3 L/h (50 Hz) / 0.36 L/h (60 Hz) with standard hose
Vacuum Inlet	max. 0.8 bar
Pressure Inlet	max. 1 bar
Outlet Pressure	1 bar
Hose	4 x 1.6 mm
Condensate Outlet	Hose nipple Ø6 mm Screw connection 4/6 (metric), 1/6″-1/4″ (US)
Protection Class :	IP 40
Materials Hose :	Norprene (Standard), Marprene,Fluran
Connections:	PVDF
Analogue Output Cooler Temperature Technical Data
Signal	4-20 mA or 2-10 Vcorresponds to -20 °C to +60 °C cooler temperature
Connection	M12x1 Plug, DIN EN 61076-2-101
Technical Data Filter AGF-PV-30-F2-L
Ambient Temperature	3 °C to 100 °C
Max. Operating Pressure with Filter	2 bar
Filter surface	125 cm2
Filter mesh	2 μm
Dead volume	108 ml
Materials
Filter:	PVDF, Duran Glass (parts in contact with media)
Seal	Viton
Filter element	sintered PTFE
Technical Data FF-3-N Moisture Detector
Ambient Temperature	3 °C to 50 °C
Max. Operating Pressure with FF-3N	2 bar
Material	PVDF, PTFE, epoxy resin, stainless steel 1.4571, 1.4576

Many gas analysis processes require extracting sample gas from the process. This also extracts process-related contamination such as particles or moisture. These can impact the measurement results or damage the measuring cells. The sample gas must therefore be conditioned before entering the analyser. The sample gas cooler reduces the gas temperature to below the dew point for this purpose, causing moisture to drop out, which is then discharged as condensate.

In addition to the status output to monitor the sample gas cooler function, we offer an optional 4 – 20 mA analog output or digital interface. The process control can access the process and diagnostic data via the Modbus RTU interface as well as configure the device settings.

The RC 1.1 is a compressor sample gas cooler designed for high cooling output and high ambient temperatures. Depending on the application, it can be configured with one or two gas paths. This makes it a vital cooling component in sophisticated analysis systems.

BUHLER – Gas Cooler Series RC 1.1

 

Heat Exchanger	TS TS-I2)	TG TG	TV-SS TVSS-I 2)
Version / Material	Stainless Steel	Glass	PVDF
Flow Rate vmax 1)	530 L/h	280 L/h	155 L/h
Inlet Dew Point τe,max1)	80 °C	80 °C	65 °C
Gas Inlet Temperature ϑG,max1)	180 °C	140 °C	140 °C
Max. Cooling Capacity Qmax	450 kJ/h	230 kJ/h	120 kJ/h
Gas Pressure pmax	160 bar	3 bar	3 bar
Pressure drop Δp (v=150 L/h)	8 mbar	8 mbar	8 mbar
Dead Volume Vtot	69 ml	48 ml	129 ml
Gas Connections (metric)	G1/4	GL14 (6mm)4)	DN 4/6
Gas Connections (US)	NPT 1/4″	GL14(1/4″)4)	1/4″-1/6″
Condensate Out Connections(metric)	G3/8	GL25(12mm)4)	G3/8
Condensate Out Connections (US)	NPT 3/8″	GL25(1/2″)4)	NPT 3/8″
Heat Exchanger	DTS(DTS-63)) DTSI(DTS6-I3))2)	DTG DTG	DTV3)DTV-I2)3)
Version / Material	Stainless steel	Glass	PVDF
Flow Rate vmax 1)	2 x 250 L/h	2 x 140 L/h	2 x 115 L/h
Inlet Dew Point τe,max1)	80 °C	65 °C	65 °C
Gas Inlet Temperature ϑG,max1)	180 °C	140 °C	140 °C
Max. Cooling Capacity Qmax	450 kJ/h	230 kJ/h	185 kJ/h
Gas Pressure pmax	25 bar	3 bar	2 bar
Pressure drop Δp (v=150 L/h)	5 mbar each	5 mbar each	15 mbar each
Dead Volume Vtot	28 / 25 ml	28 / 25 ml	21 / 21 ml
Gas Connections (metric)	6 mm tube	GL14(6mm) 4)	DN 4/6
Gas Connections (US)	1/4″ tube	GL14(1/4″)4)	1/4″-1/6″
Condensate Out Connections(metric)	Tube 10 mm (6 mm)	GL18(10mm)4)	DN 5/8
Condensate Out Connections (US)	Tube 3/8″ (1/4″)	GL18(3/8″)4)	3/16″-5/16″

 

PT. Mora Anugerah Berkat [M.A.B] adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan laboratorium untuk gas analyzer seperti BUHLER – Gas Cooler Series RC 1.1 , kami juga menyediakan berbagai brand/merk internasional dari USA, Eropa dan China,produk internasional yang kami supply/tawarkan seperti : Buhle Tchnology, ECOM J2KN, Bacharach dan lain – lain ; Kami juga menyediakan Jasa Perbaikan (SERVICE), Jasa Perawatan (Maintenace) dan support untuk KALIBRASI / AKSESSORIES SPAREPART jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda.

BUHLER – Gas Cooler Series RC 1.1

 

PT. Mora Anugerah Berkat (M.A.B)
Click Here : Sample Gas Cooler RC 1.1 Brochure
Click Here : Gas Cooler Series TC-MIDI Brochure
Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang – Provinsi Banten
Phone : 021 7345.7064
Mobile: 0812.8140.0749 / 0812.8770.5470
Chat : Whats App,Line,WeChat,Telegram
Website : www.moraanugerah.id – www.moraanugerah.com
Email : info@moraanugerah.com – marketing@moraanugerah.com – marketing_div@moraanugerah.com