No.162-FS
Standard :
JIS-K7125, P8147, ASTM-D3247, ISO-8295, TAPPI-T816
- This tester is used to measure the friction coefficient of plastic film and paper according to the horizontal method.
- The operator is to attach the test specimen to the sliding surface and sliding sled, then pull the sled with a metal wire that is connected to a load cell to acquire the static coefficient of friction and dynamic coefficient of friction.
Specification
| Test Method |
Paper and Paperboard |
Plastic Film |
| Abrading Head |
W60 mm, L100 mm, Mass 1,000 g |
63 × 63 mm (Abrading Surface 40 cm2)
Mass 200 ± 2 g (1.96 ± 0.02 N) |
| Flat Board |
W200 mm, L380 mm |
W200 mm, L380 mm |
| Specimen |
Surface: W100 mm, L250 mm
Sled: W60 mm, L120 mm |
W80 mm, L200 mm, T0.5 mm or Less |
| Friction Measuring |
Load Cell: Max. 10 N, 20 N, 50 N |
Load Cell: Max. 10 N, 20 N, 50 N |
| Speed |
10.0 ± 0.2 mm/min |
100 ± 10 mm/min or 500 ± 10 mm/min |
| Accessories |
― |
Accessory Plate (Mass Less than 5 g) |
| Option |
Variable Speed Spec, Software, Recorder, Heating Plate Spec. |
Variable Speed Spec, Software, Recorder, Heating Plate Spec. |
| Power Source |
AC 100 V, 1-Phase, 5 A, 50/60 Hz |
AC 100 V, 1-Phase, 5 A, 50/60 Hz |
| Dimensions/ Weight (Approx.) |
W570 × D280 × H330 mm, 27 kg |
W570 × D280 × H330 mm, 27 kg |
Untuk informasi lebih lengkap dari
SLIP TESTER (HORIZONTAL METHOD) :
Download Here :
