The FLIR identiFINDER R440 is a lightweight, sourceless radioisotope identification device (RIID) that delivers sensitive detection and fast results for routine survey or secondary screening response missions. The 2x2 NaI (sodium iodide) detector responds to radiological threats from farther away, behind heavier shielding, and with better resolution than similarly-sized RIIDs. The extended energy range provides neutron indication. Its light weight makes single-handed operation easy on extended operations, while the IP67-rated enclosure is built to survive. The bold, easy-to-read interface with 360° EasyFinder™ mode expedites decision-making to keep personnel and the community safe
Radioisotope Identification Device (RIID) - FLIR 440
SMALLEST, LIGHTEST RIID WITH 2X2 NaI DETECTOR Accurate identification and faster time to alarm 3.5 times more sensitive with 10% better resolution than comparatively sized RIIDs High dose rate range provides stability and accuracy even in high dose rate environments Two models: gamma only (with neutron indication); gamma and neutron detection and measurement Sourceless stabilization improves data collection, reducing false positives
RUGGED, IP67-RATED ENCLOSURE Built to survive fast-paced, rigorous missions Protected from total dust ingress and water immersion (rain, splashing and accidental submersion) up to 1 meter in depth for up to 30 minutes ANSI N42.42 and ANSI N42.34 compliant Drop-tested up to 1 meter Completely enclosed crystal provides enhanced ruggedization
STATE-OF-THE-ART USER FEATURES Clear results and enhanced communications keep responders and the community safe 360° EasyFinder mode collects and interprets data and then pinpoints the exact location of source for user Built-in wireless communications Built for interagency standardization - common user interface provides familiarity for users of any identiFINDER product
Radioisotope Identification Device (RIID) - FLIR 440
FLIR identiFINDER R440 Specifications |
|||
General |
|||
Technology |
Radioisotope identification device (RIID) |
||
Gamma – NaI(Tl) |
51 x 51 mm (2.0 x 2.0") |
||
Gamma/Neutron NaIL |
51 x 51 mm (2.0 x 2.0") |
||
Energy Range (Gamma) |
10 keV to 10 MeV |
||
Gamma Sensitivity |
1850 cps/μSv/h |
||
(Cs-137, NaI) |
|||
Gamma Spectrum Length |
1024 channels |
||
Dose Rate Range |
10 n Sv/h - 10 m Sv/h |
||
(Cs-137, NaI) |
(1 μrem/h - 1 rem/h) ± 30% |
||
Dose Rate Range ID |
10 n Sv/h - 250 m μSv/h |
||
Mode (Cs-137, NaI) |
(1 μrem/h - 25 μrem/h) |
||
Overload Dose |
10 n Sv/h - 500 m μSv/h |
||
Rate Range (Cs-137, NaI) |
(1 μrem/h - 50 μrem/h) |
||
Stabilisation |
Sourceless gain stabilisation |
||
(patents pending). |
|||
Linearisation |
Real-time linearisation of gamma energy. |
||
Typical Resolution |
≤ 7% FWHM at 662 keV |
||
with NaI detector at 20°C |
|||
Sampling and Analysis |
|||
Sample Introduction |
Absorption of EM gamma (NaI) or |
||
gamma and neutron emissions (NaIL). |
|||
Threats |
Detects neutron or gamma radiation |
||
emitted from natural occurrences in the |
|||
environment, special nuclear material, |
|||
industrial, or medical material. |
|||
Nuclide Identification |
According to ANSI N42.34 |
||
Library Categories |
SNM, IND, MED, NORM. |
||
Time to Alarm |
From a few seconds to minutes. |
||
System Interface |
|||
Display and Alerts |
Transflective colour LCD / 3" |
||
(2.72" x 1.61") Colour TFT Display, |
|||
Resolution: 800 x 480 pixels. |
|||
Communication |
USB 2.0, USB OTG; Bluetooth® Class 2.0 |
||
≤10 m range (removable); |
|||
WiFi 802.11 g/n |
|||
Data Storage |
32 GB internal memory |
||
Training Requirements |
<10 mins for operator; 1 day for advanced user. |
||
GPS (removable) |
12-channel SiRF III receiver |
||
Software |
On-board webserver software |
||
Power |
|||
Input Voltage |
100 - 24- V AC (wall adapter and USB cable supplied. |
||
Battery Specifications |
Supplied: 2 x rechargeable Li-Ion smartpacks and 1 x 4 x AA pack; |
||
≤ 6 h runtime with one Li-Ion smartpack, ≤ 12 h with both Li-Ion; |
|||
runtime of ≤ 4 h with AA battery pack (Li-Ion); |
|||
Optional rechargeable NiMH ion smartpack with ≤ 5 h runtime; |
|||
recharge ≤ 4 h when using AC; recharge > 4 h when using USB; run |
|||
times specified are obtained with a mix of Dose Rate, Finder, and ID |
|||
operating mode. |
|||
Cold Start Time |
<2 mins from cold start. |
||
Environmental |
|||
Operating Temperature |
-20 to 50°C (4 to 122°F) |
||
(Ambient) |
|||
Operating Humidity |
10 to 80% |
||
Storage Temperature |
-10 to 35°C (14 to 95°F) |
||
Physical Features |
|||
Dimensions (W x L x H)) |
10.2 x 26.9 x 9.4 cm |
||
Weight |
≤1.5 kg |
||
Enclosure and Protection |
Aluminium housing protection rating IP67 according to IEC 60529. |
||