Blog General Laboratory Equipment
Jual Two Gang Mould
8 Agustus 2022
•
1x dilihat
PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak dalam bidang laboratorium khususnya material testing untuk konstruksi/pertambangan (civil laboratorium testing equipment), peralatan yang kami supply meliputi : alat lab uji tanah (soil test equipment),alat lab uji aggregates (aggregates test equipment),alat lab uji beton (concrete test equipment).alat lab uji sement (cement test equipment),alat lab uji aspal (asphalt test equipment),alat NDT (Non Destructive Test Equipment) dan Alat Survey.
Jual Two Gang Mould
MOULDS FOR EXPANSION AND SHRINKAGE
Steel moulds in compliance with ASTM and BS standards with two or three compartments, equipped with special pegs that allow the extraction of ready-made specimens to be tested with linear change gauges.
E072 Two Gang Prism Mould, ASTM (Cement - Mortar)
-
Standard Method : ASTM C490
-
Two gang prism mould to produce 25 x 25 x 250 mm specimens for expansion tests in autoclave. Complete with 4 steel inserts.
-
Weight: 6 Kg approx
-
==================
E073 Two Gang Prism Mould, BS ( Cement - Mortar )
-
Standard Method : BS 1881 BS 6073
-
Two gang prism mould to produce 75 x 75 x 254 mm specimens. Complete with 4 steel inserts.
-
Weight: 9 Kg approx.
-
==================
Jual Two Gang Mould
E075 Three Gang Prism Mould ( Cement - Mortar )
-
Standard Method : EN 12617-4 COMPARABLE TO ASTM C438 COMPARABLE TO NF P15-433
-
FOR 40.1 x 40 x 160 mm MORTAR SPECIMENS
-
Used for the determination of linear shrinkage of cement mortar.
-
Manufactured from steel with hardness over 200 HV. All surfaces are grinded and all parts are marked with an identification number for a correct assembling.
-
A part-number is engraved on each mould and a Certificate of Conformity is supplied along with. Complete with 6 steel inserts and fixing screws.
-
Weight: 8.6 Kg approx.
-
==================
E107 Three Gang Prism Mould, NF - DIN ( Cement - Mortar )
-
Standard Method : NF P15-434 DIN 1164
-
Three gang prism mould to produce 40x40x160 mm specimens. Made from steel 55 HRB. Complete with 6 inserts.
-
Weight: 8 Kg approx.
-
==================
E113 Three Gang Prism Mould, NF P18-427 ( Cement - Mortar )
-
Standard Method : NF P18-427
-
Three gang prism mould to produce 70,7x70,7x282,8 mm specimens.
-
Made from steel 55 HRB. Complete with 6 inserts.
-
Weight : 17 Kg
-
==================
E115 Three Gang Prism Mould, UNI 8147 ( Concrete - Cement - Mortar )
-
Standard Method : UNI 8147
-
Three gang prism mould to produce 50 x 50 x 250 mm specimens.
-
Weight: 10 kg approx.
-
==================
E110 Three Gang Cube Mould 50mm ( Cement - Mortar )
-
Made from steel, hardness 55 HRB, it can be also used for soil and other materials.
-
Weight: 6 Kg approx.
-
==================
E110-01 Three Gang Mould for Cubes ( Cement - Mortar )
-
Ground steel mould for three cubes 40mm sides.
-
Dimensions : 190 x 100 x 47 mm approx.
-
Weight : 2 kg approx.
-
==================
E112 Three Gang Mould, NF P18-401 ( Cement - Mortar )
-
Standard Method : NF P-18-401
-
Three gang mould, steel made, for 70 x 70 x 282.8 mm prisms.
-
Weight : 17 Kg approx.
-
==================
E105 Three Gang Mould,Hardness 55 HRB ( Cement - Mortar )
-
Standard Method : NF P15-413 ASTM C348 DIN 1164 DIN 1060
-
Three gang mould for prisms 40 x 40 x 160 mm.
-
Made from steel, hardness 55 HRB, it conforms to the above mentioned Specifications.
-
Weight: 8 Kg approx.
-
==================
E103 Three Gang Verified Mould ( Cement - Mortar )
-
Standard Method : EN 196-1 EN ISO 679
-
Three gang verified moulf for 40.1x40x160 mm prisms.
-
Identical in shape to model E102, but manufactured from heavy duty steel with hardness of inside walls over HV 500 (EN196/1 Specifications recommend hardness HV 400). This high hardness value keeps the mould within the tolerances requested by Spec. for many tests, granting very long utilisation life.
-
All parts are marked with an identification number for a correct assembling. Each mould is individually verified in the dimensional tolerances, hardness, squareness, flatness and roughness with instruments periodically certified by Namas Centre or equivalent. A part-number is engraved on each mould, and a Certificate of Conformity is supplied along with.
-
Weight : 8560 g.
-
==================
E104 Three Gang Mould for Prisms 40.1 x 40 x 160 mm
-
Standard Method : EN 196
-
Three gang verified mould for prisms 40.1x40x160 mm. Similar to mod. E103, but with:
-
Large base (mm) : 240 x 245
-
Weight : 11.850 Kg
-
Manufactured expressly for “Italcementi Group” cement factory.
-
==================
E110-01 Three Gang Mould for Cubes ( Cement - Mortar )
-
Ground steel mould for three cubes 40mm sides.
-
Dimensions : 190 x 100 x 47 mm approx.
-
Weight : 2 kg approx.
-
PT. Mora Anugerah Berkat adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan laboratorium untuk sipil/pertambangan seperti Matest - Two Gang Mould and Three Gang Mould, kami juga menyediakan peralatan baik lokal maupun custom (khusus) yang sudah teruji dan sesuai dengan ASTM,kami juga menyediakan berbagai brand/merk internasional dari USA,Eropa dan China,produk internasional yang kami supply/tawarkan seperti : MATEST, GILSON, FORNEY, HUMBOLDT, CONTROL, ELE, UTEST, RETSCH, Endecotts, HMP, PROCEQ,HILTI dan lain - lain.
Jual Two Gang Mould
Kami juga menyediakan Jasa Perbaikan (SERVICE),Jasa Perawatan (Maintenace) dan support untuk KALIBRASI/AKSESSORIES SPAREPART jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda
-
PT. Mora Anugerah Berkat (M.A.B)
-
Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten
-
Phone : 021 7345.7064 / 7366.0160
-
Mobile: 0812.8140.0749 / 0812.8770.5470
-
Chat : Whats App,Line,WeChat,Telegram
-
-
Email : info@moraanugerah.com - info@moraanugerah.id -marketing_div@moraanugerah.com