BRITTLENESS TEMPERATURE TESTER
Standard Method : JIS-C3005, K6261, K6723, K7216, ASTM-D746, ISO-812, 974
This tester is used to measure the 50% impact brittleness temperature of plastic, rubber, and electric insulated wire at low temperature. By attaching one end of the test specimen to the holder and adding impact to the other end, the operator is to check for any breaks to the test specimen. The refrigerating method for 121 is dry ice and the 121-R is equipped with a refrigerator.
BRITTLENESS TEMPERATURE TESTER
|
Specification
|
Hangings
|
5 Hangings (1 Holder)
|
Specimen
|
W6.0 ± 0.4mm, L38± 0.2 mm ,
T2.0 ± 0.2 mm (Type A)
|
Striking
Edge
|
Top R1.6 ± 0.1 mm,
Distance to Chuck 6.4 ± 0.2 mm,
Distance to Striking Point 8.0 ± 0.2 mm
|
Striking Speed
|
2.0 ± 0.2 m/s
|
Temperature
Range
|
Room Temperature to -70 °C
(Dry Ice & Refrigeration Medium)
|
Refrigeration
Medium Amount
|
Approx. 15 L
|
Accessories
|
Tightening Rod, Torque Driver,
Specimen Cutter
|
Option
|
Rotary Holder (5 Hangings × 4 Holders),
Specimen Holder (Type B)
|
Power Source
|
AC 100 V, 1-Phase, 15 A, 50/60 Hz
|
Air Source
|
0.5 MPa or More
|
Dimensions / Weight
(Approx.)
|
W770 × D830 × H550 mm/ 155 kg
|
BRITTLENESS TEMPERATURE TESTER (WITH REFRIGERATING MACHINE/ ROTARY HOLDER TYPE)
Standard Method : JIS-C3005, K6261, K6723, K7216, ASTM-D746, ISO-812, 974
This tester is equipped with a rotary holder to continuously run maximum of 4 tests. The testing condition (test temperature and dip time) for the 4 tests can be set on the touch panel screen, which will enable efficient testing.
BRITTLENESS TEMPERATURE TESTER
|
(WITH REFRIGERATING MACHINE/ ROTARY HOLDER TYPE)
|
Specification
|
Hangings
|
5 Hangings × 4 Holders (Total 20 Hangings),
|
Automatic Operation System
|
Specimen
|
W6.0 ± 0.4mm, L38 ± 0.2 mm ,
T2.0 ± 0.2 mm (Type A)
|
Striking
Edge
|
Top R1.6 ± 0.1 mm, Distance to Chuck 6.4 ± 0.2 mm,
Distance to Striking Point 8.0 ± 0.2 mm
|
Striking Speed
|
2.0 ± 0.2 m/s
|
Temperature Range
|
Normal to -70 °C, (Refrigerator & Refrigeration Medium)
|
Refrigeration
Medium Amount
|
Approx. 15 L
|
Accessories
|
Tightening Rod, Torque Driver, Specimen Cutter
|
Option
|
Specimen Holder (Type B)
|
Power Source
|
AC 200 V, 3-Phase, 30 A, 50/60 Hz
|
Air Source
|
0.5 MPa or More
|
Dimensions / Weight
(Approx.)
|
W830 × D950 × H1,650 mm, 400 kg
|
BRITTLENESS TEMPERATURE TESTER (WITH REFRIGERATING MACHINE)
Standard Method : JIS-C3005, K6261, K6723, K7216, ASTM-D746, ISO-812, 974
This tester is used to measure the 50 % impact brittleness temperature of plastic, rubber, and electric insulated wire at low temperature. By attaching one end of the test specimen to the holder and adding impact to the other end, the operator is to check for any breaks to the test specimen. The refrigerating method for 121 is dry ice and the 121-R is equipped with a refrigerator.
BRITTLENESS TEMPERATURE TESTER (WITH REFRIGERATING MACHINE)
|
Specification
|
Hangings
|
5 Hangings (1 Holder), Automatic Operation System
|
Specimen
|
W6.0 ± 0.4mm, L38± 0.2 mm , T2.0 ± 0.2 mm (Type A)
|
Striking
Edge
|
Top R1.6 ± 0.1 mm, Distance to Chuck 6.4 ± 0.2 mm,
Distance to Striking Point 8.0 ± 0.2 mm
|
Striking Speed
|
2.0 ± 0.2 m/s
|
Temperature
Range
|
Room Temperature to -70 °C
(Refrigerator & Refrigeration Medium)
(Option: Combined with Liquid Nitrogen -100 °C)
|
Refrigeration
Medium Amount
|
Approx. 15 L
|
Accessories
|
Tightening Rod, Torque Driver, Specimen Cutter
|
Option
|
Rotary Holder (5 Hangings × 4 Holders),
|
Specimen Holder (Type B)
|
Power Source
|
AC 200 V, 3-Phase, 30 A, 50/60 Hz
|
Dimensions / Weight
(Approx.)
|
W830 × D950 × H1,650 mm/ 400 kg
|
AUTO BRITTLENESS TEMPERATURE TESTER (FULLY AUTOMATIC)
Standard Method : JIS-C3005, K6261, K6723, K7216, ASTM-D746, ISO-812, 974
This tester is the robotic version of the BRITTLENESS TEMPERATURE TESTER. By inputting the test conditions in the computer software, the operator can continuously run 40 tests (200 samples).
AUTO BRITTLENESS TEMPERATURE TESTER (FULLY AUTOMATIC)
|
Specification
|
Hangings
|
5 Hangings × 40 Holders (Total 200 Hangings)
|
Specimen
|
W6.0 ± 0.4 mm, L38 ± 0.2 mm, T2.0 ± 0.2 mm (Type A)
|
Striking
Edge
|
Top R1.6 ± 0.1 mm, Distance to Chuck 6.4 ± 0.2 mm,
Distance to Striking Point 8.0 ± 0.2 mm
|
Striking Speed
|
2.0 ± 0.2 m/s
|
Temperature
Range
|
Room Temperature to -70 °C
(Refrigerator & Refrigeration Medium)
|
Refrigeration
Medium Amount
|
Approx. 15 L
|
Software
|
Windows Compatible
|
Accessories
|
Tightening Rod, Torque Driver, Specimen Cutter
|
Option
|
Specimen Holder (Type B)
|
Power Source
|
AC 200 V, 3-Phase, 30 A, 50/60 Hz
|
Air Source
|
0.5 MPa or More
|
Dimensions / Weight
(Approx.)
|
W1,160 × D1,030 × H2,150 mm/ 450 kg
|
Jika anda membutuhkan/mencari alat Brittleness Testing.yang banyak di gunakan untuk pengujian material plastik,jangan ragu untuk menghubungi kami,marketing dan sales kami siap menjawab segala kebutuhan anda khususnya untuk alat uji Brittleness Test.
BRITTLENESS TESTER
Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di :
PT. Mora Anugerah Berkat (M.A.B)
Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten
Phone : (+62) 21 7345.7064 / 7366.0160
Mobile : 0812.8140.0749 / 0812.8770.5470 (Chat : Whats App,Line,WeChat,Telegram)
Website : http://moraanugerah.id/ - http://moraanugerah.com/
Email : info@moraanugerah.com - info@moraanugerah.id - marketing_div@moraanugerah.com
