AUTOMATIC CAPILLARY RHEOMETER – PT. Mora Anugerah Berkat

By

Automatic Capillary Rheometer

AUTOMATIC CAPILLARY RHEOMETER – PT. Mora Anugerah Berkat

 

PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak dalam bidang alat laboratorium material testing, kami menyediakan berbagai alat material testing khususnya untuk industri , salah satu alat pengujian yang kami tawarkan adalah AUTOMATIC CAPILLARY RHEOMETER – PT. Mora Anugerah Berkat, kami juga menyediakan brand Yasuda Seiki dan merek yang sudah di kenal dalam bidang industri/manufaktur.

  • No.140-SAS-2002 Automatic Capillary Rheometer & No.140-SAS-2005 Automatic Capillary Rheometer

  • Standard : JIS-K7199, ASTM-D3835, ISO-11443

  • This tester evaluates the flow feature of molten plastic during the forming process.

  • The molten test specimen inside the cylinder that is set at a specific temperature will be extruded from the capillary die.

  • During the extrusion, the shear stress and the shear viscosity is detected to measure the melt viscosity of the test specimen.

  • The tester is equipped with an automatic cleaning system which enables the operator to continuously run 1 test cycle (option of 3 test cycles).

  • The tester can be chosen between the light load type and the heavy load type according to the test specimen’s maximum load.

  • Click Here : YASUDA SEIKI : Plastic and Rubber Testing Catalog

  • Click Here : Plastic, Rubber, Film and Polymer Testing Equipment Catalog

AUTOMATIC CAPILLARY RHEOMETER – PT. Mora Anugerah Berkat

 

Spesifikasi Automatic Capillary Rheometer

Model

No.140-SAS LIGHT LOAD

No.140-SAS HEAVY LOAD

Hangings

1 or 3 Hangings (2 kinds)

1 or 3 Hangings (2 kinds)

Maximum Load

Max. 10 kN

Max. 20 kN

Load Measuring

Load Cell: Max. 10 kN (Scale 0.1 N)

Load Cell, Max. 20 kN (Scale 0.1 N)

Ram Speed

0.5 to 500 mm/min

0.5 to 1,000 mm/min

Capillary Die

φ0.5 to φ2 mm, L/D (To be specified)

φ0.5 to φ2 mm, L/D (To be specified)

Piston

φ9.510 ± 0.005 mm, L6.35 ± 0.10 mm

φ9.510 ± 0.005 mm, L6.35 ± 0.10 mm

Cylinder

Inner φ9.550 ± 0.025 mm, L160 mm

Inner φ9.550 ± 0.025 mm, L200 mmm

Temperature Range

Max. 400 °C

Max. 400 °C

Software

Windows Compatible

Windows Compatible

Accessories

Cleaning Rod (Die & Cylinder),Solvent Cleaning Device,Specimen Cup, Cup Holder,
Infundibulum, Die Gauge,Spirit Level, Dust Box, Gauze,Air Gun, Ratchet Wrench

Cleaning Rod (Die & Cylinder),Solvent Cleaning Device,Specimen Cup, Cup Holder,
Infundibulum, Die Gauge,Spirit Level, Dust Box, Gauze,Air Gun, Ratchet Wrench

Option

Hastelloy Spec, Specimen Purging Device,Specimen Drying Device, Air Compressor,Temperature Calibration Device, Exhaust Fan,Smoke-Detection Sensor

Hastelloy Spec, Specimen Purging Device,Specimen Drying Device, Air Compressor,Temperature Calibration Device, Exhaust Fan,Smoke-Detection Sensor

Power Source

AC 200 V, 1-Phase, 10 A, 50/60 Hz

AC 200 V, 1-Phase, 10 A, 50/60 Hz

Air Source

0.5 MPa or More

0.5 MPa or More

Dimensions /
Weight (Approx.)

W620 × D600 × H1,120 mm ;
150 kg

W620 × D600 × H1,460 mm ;
205 kg

 

Kami juga menyediakan after sales, service dan maintenance untuk alat uji / material testing equipment untuk industrial testing yang kami supplai yaitu Automatic Capillary Rheometer Tester jangan ragu untuk menghubungi kami.

AUTOMATIC CAPILLARY RHEOMETER – PT. Mora Anugerah Berkat