Alat Uji Taber Abrasion Resistance Tester

 

 

 

Alat Uji Taber Abrasion Resistance Tester 

 

PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak dalam bidang industrial testing khususnya untuk pengujian material pada industri / manufacture seperti pada industri bidang (plastic,rubber,tape dan polymer), industri bidang (tinta,pewarnaan,chemical),industri bidang (kertas/paper,pulp) dan industri bidang (garment,textile,yarn dll) dengan inovasi PT.Mora Anugerah Berkat ingin menjadi one stop solution atas kebutuhan industrial testing material yang di butuhkan bagi industri / manufactur yang ada di indonesia.

No.101 Taber Type Abrasion Tester

Standard :

JIS-A1453, K5400, K5600-5-8/9, K5665, K6264-2, K6404-4, K6902, K7204, (L1018), L1085, L1096, ASTM-D1044, TAPPI-T476, JAS (JASO-M403), ISO-4649, 5470-1, 7784-½, 9352

 

Description

• This tester is used to evaluate the abrading endurance of flat surface materials when they are abraded with an abrading wheel.

• The operator is to place the abrading wheel to the rotating test specimen at a prescript load and abrade  Taber Type Abrasion Tester the test specimen.

• After the test is finished, the operator is to measure the abraded mass, volume, thickness, and the optical difference of the test specimen.

• This tester is widely used in testing plastic, rubber, decorative sheet, leather, paper, and paint surface.

 

Model	No.101-H TABER TYPE ABRASION TESTER
Turn Table	φ150 mm
Table Rotation Speed	60 ± 2 rpm, 70 ± 2 rpm
Weight Load	2.45 N (250 gf), 4.9 N (500 gf), 9.8 N (1,000 gf)
Counter	6 Digits Preset Counter
Suction Nozzle	Inner φ8 mm: 2 pcs
Option	Inlet Pressure Gauge,Safety Cover
Accessories	Abrasion Wheel : 1 set (2 sets for No.101-H-2), Thickness Guage : 2 pcs, Suction Device (Vacuum Cleaner) : 1 set (2 sets for No.101-H-2)
Power Source	1 Hanging (No.101-H-1): AC 100 V, 1-Phase, 15 A, 50/60 Hz 2 Hangings (No.101-H-2): AC 100 V, 1-Phase, 15 A, 50/60 Hz *2 outlets required
Dimensions / Weight (Approx.)	1 Hanging (No.101-H-1): Approx. W370 × D390 × H450 mm/ 24 kg 2 Hangings (No.101-H-2): Approx. W740 × D390 × H450 mm/ 50 kg

Alat Uji Taber Abrasion Resistance Tester 

No.101-K Sander (For Abrasion Wheel)
Tool	Diamond
Rotation Speed	Approx. 1,400 rpm (50 Hz) Approx. 1,700 rpm (60 Hz)
Power Source	AC 100 V, 1-Phase, 3 A, 50/60 Hz
Dimensions / Weight (Approx.)	Approx. W210 × D350 × H390 mm/ 12 kg

Description

Model	No.101-HS TABER TYPE ABRASION TESTER (WITH WIND METER)
Turn Table	φ150 mm
Table Rotation Speed	60 ± 2 rpm, 70 ± 2 rpm, 72 ± 2 rpm
Weight Load	2.45 N (250 gf), 4.9 N (500 gf), 9.8 N (1,000 gf)
Counter	6 Digits Preset Counter
Suction Nozzle	Inner φ8 mm: 2 pcs
Option	Safety Cover
Accessories	Abrasion Wheel : 1 set (2 sets for No.101-H-2), Thickness Guage : 2 pcs, Suction Device (Vacuum Cleaner) : 1 set (2 sets for No.101-H-2)
Power Source	AC 100 V, 1-Phase, 15 A, 50/60 Hz
Dimensions / Weight (Approx.)	Approx. W370 × D400 × H390 mm/ 30 kg

PT. Mora Anugerah Berkat adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan pengujian industrial seperti Alat Uji Taber Abrasion Resistance Tester  , kami juga menyediakan berbagai brand/merk internasional dari USA, Eropa dan China, Kami juga menyediakan Jasa Perbaikan (SERVICE), Jasa Perawatan (Maintenace) dan support untuk KALIBRASI / AKSESSORIES SPAREPART jangan ragu untuk menghubungi kami marketing dan sales kami siap membantu menjawab segala kebutuhan anda.