Burst Tester (Pressure Decay Method)

By

 

Burst Tester (Pressure Decay Method)

 

Burst Tester is suitable for the quantitative determination of sealing strength, heating sealing quality, burst pressure and leakage of flexible and aseptic packages. It can also be used to determine the seal- ing performance of pilfer-free bottle caps and soft tubes. The compression strength, connection

strength of cap and body, cap losing strength, seal strength and butting strength of tubes are the applications 

Click Here  Burst Tester (Pressure Decay Method) and Click Here : Plastic & Rubber Test Equipment

Burst Tester complies with

ASTM F2054 “Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates”

ASTM F1140 “Test Methods for Internal Pressurization Failure Re- sistance of Unrestrained Packages for Medical Applications”

ISO 11607-1, ISO 11607-2

Technical Data

  • Pressure Range : 0 ~ 600 KPa ; 0~ 87.0 psi (Standard)

  • Beam Width     : 300 mm(for open package)

  • Inflating Head : Φ4 mm (Standard for sealed package)

  • Gas Pressure   : 0.4 MPa ~ 0.9 MPa 

  • Port Size      : Φ6 mm PU hose

Principle

Burst Test: It internally pressurizes the packages until the package fails.

Creep Test: Pressurize the package internally to a pressure and maintains for a specific time. 

Creep to Failure: The package is creep-tested and held until the package fails.

Burst Tester (Pressure Decay Method)

 

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di :